Put the fly ash or sand into the ball mill to mill via the conveyor
belt, after milling, put the slurry into the slurry storage
tank by slurry pump.
Full Automatic Concrete AAC Block Manufacturing Machine
|
Detailed Product Description
|
Autoclaved Aerated Concrete (AAC) is a siliceous material (sand, fly ash and silicon tailings such as waste porcelain clay, stone processing waste materials, blast furnace slag, etc.) and calcareous materials (lime, cement) as the main raw material, mixing fat gas agent (aluminum powder), by ingredients, mixing, casting, pre-raising, cutting, autoclave, curing process made of light porous silicate products, because by the hair contains a lot of gas even after the small pores, hence the name of aerated concrete.
The normal production capacity:
Advantages of the aac block 1. Lightweight: Porosity achieve 70% to 85%, volume density is generally 500 ~ 900kg/m3, as 1/5 of general concrete the 1/4of clay, the 1/3 of hollow brick, and similar with wood can float in water. It can reduce building weight, reduction in the cost of integrated building. 2. Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 90mm walls can reach to 245 minutes fire resistance, 300mm thick up wall can reach to 520 minutes fire resistance. 3. Sound insulation: Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 10mm thick wall up to 41 db. 4. Insulation: As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary. 5. Permeability: Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the bathroom, the wall can be treated to interface directly paste tiles. 6. Anti-seismic: The same building structure, improve the two seismic than the brick level. 7. Green: Manufacturing, transportation, all use the process of pollution, to protect arable land, saving energy, is one kind of a green building material. 8. Durability: material strength is stability, in the specimens tested after one year of atmospheric exposure; the intensity increased by 25%, and remained stable after ten years. 9. Economies: An integrated lower cost than using more than 5% of solid clay bricks, and can increase the usable area, greatly enhance the utilization of floor space. Company introduction: SANKON Building Materials Technology Co. is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines. We employ a team of experts with more than 20 years of industry experience to drive our innovative efforts and create highly efficient building material production equipment. Using highly automated production machinery, SANKON is able to produce more than 9 thousand tons of equipment each year to satisfy our customers all over the world. Contact us today to learn more about our outstanding AAC production machinery.
Process flow of AAC production line: 1. Raw materials processing 2. Batching, mixing and casting The lime, cement will convey by conveyor to the dry powder measure
scale to scale separately. The slurry convey by slurry pump then to the automatic scale;the power and slurry put into the mixer,pouring into the mould. 3. Curing After slurry pouring into the mould, put the mould box into the
curing room with 50～70℃. After 2-3 hours curing,the blocks become solid. 4. Cutting Using reversal crane carry the mould and block to demould on
cutting cart. The cutting cart will take the block to level cutting machine,vertical cutting ,two sides cutting,and remove the top waste material. 5. Steaming Finished cutting using semi-product crane carry to the front of
autoclavegrouped,hoisting machine or dragger will drag steam trolley into autoclave to steam,it need 10-12 hours. 6. Finished block dealing Finished product out of autoclave,with separting machine to
separate layer by layer. 7. Packing Using finished block carry hanger clamp the finished product to
package line on wooden pallets,after package, then by forklift transport the finished products to piled yard according to specifications to stack. If you are interested in our products and want to know information
from us please feel free to contact us. JIANGSU SANKON BUILDING MATERIALS TECHNOLOGY CO.,LTD. Add.: No. 31, Xinxi Road, Chuanjiang Town, Xinbei District,
Changzhou City, Jiangsu Province |
||||||||||||||||||||||||||||||||||||
| Product Tags: concrete AAC block manufacturing machine automatic AAC block manufacturing machine concrete AAC Block Making Unit |
Related Products
|
Automatic AAC Block Manufacturing Machine CE ISO9001 Certificated |
|
Aerated Concrete Block Making Machine AAC Bricks Building Block Manufacturing Plant |
|
Automatic AAC Block Manufacturing Machine CE ISO9001 Certificated |
|
AAC Block Manufacturing Machine And Plant |
|
Quick Lime Brick AAC Production Line 400 - 1000 kW |
|
Aerated Concrete Block Making Machine AAC Bricks Building Block Manufacturing Plant |
Email to this supplier