Surface Light Source 395nm AC220V UV LED Curing Systems

Non-Standard Custom UV LED Curing Systems Surface Light Source

UVLED curing is a kind of UV curing, which uses UVLED light source to cure UV ink, UV glue,

UV coating, etc.

Various adhesive manufacturers have developed a series of UV products for bonding, sealing, printing,

etc. according to the UV curing characteristics, and they are widely used in many fields such as

communications, electronics, optics, and printing. These products will be cured or hardened (polymerized)

under UV light (a certain wavelength and a certain light intensity), and it is more efficient, energy-saving

and environmentally friendly than traditional products-UV light curing.

Compared with traditional UV curing equipment, the service life of the mercury lamp is only 800-3000

hours, and the service life of the UV LED ultraviolet curing system can reach 20,000-30,000 hours.

The LED method can be lit instantaneously only when ultraviolet light is needed. When DUIY=1/5

(preparation time=5 irradiation time=1), the service life of the LED method is equivalent to 30-40 times

that of the mercury lamp method. Reduce the time to replace the bulb: improve production efficiency,

but also very energy-saving. When the traditional mercury lamp curing equipment is working, because

the mercury lamp starts slowly and the opening and closing affects the bulb life, it must be lit all the time,

which not only causes unnecessary power consumption but also shortens the working life of the

mercury lamp.