High Efficiency Automatic Busbar Riveting Machine For Steel Aluminum

High Efficiency Automatic Busbar Riveting Machine For Steel Aluminum

Principle of self-piercing:
The end of the rivet opens a horn shape under the action of a concave die and riveting pin at the base layer to lock it with the top layer. Generally, the thicker layer at the base and thickness have no limited, ductile material at the base layer. The material at the base layer is joint metal with non-metal material.

We have researched and studied the self-piercing technology from the year 1995, and the main purpose of to joint different metal material with good sealing and protect penetration function. The main advantages are low energy consumption, use small venues and pollution-free etc. Applicable scope: coated steel sheet, aluminum, zinc, reinforced plastic, compound material, etc.

• Specification: Max. Pressure: 50Kn
• Stroke: 50mm
• Flow: 13 litre/m
• Max. Working pressure 25MPa
• Power: 4Kw
• Oil tank capacity: 80Litre
• Oil tank dimension: 650mmX430mmX500mm
• Main machine dimension: 380mmX400mmX780mm
• Hydraulic oil: HLP32 DIN 51524
• Voltage: 220-. 440V, 50Hz, 3-phase
• Total(hydraulic system and main machine): 100Kg
• Self-piercing range: Steel, Aluminium, Magnesium, Plastic, Copper, Nun-metallic Material, Sandwich structure etc.

Equipment data on self-piercing riveting machine

Function introduction

Self-piercing riveting machine, also called riveting gun, is applied for busbar assembly. It can be customized according to different busbar housing. Before riveting, operator does not need to drill the hole. Machine can realize self-piercing riveting by its pressure and rivet structure. Working principal is as below.

Features:

1, The supercharger drives the split cylinder as the riveting power source, which has the characteristics of low noise, low energy consumption and no pollution.
2, The servo system controls the rivet clamp and the left and right movement, to realize the two sides are simultaneously riveted by the forward movement and the stop action of the roller.
3, The discharge line has a lateral removal function.
4, The busbar casing is no more than 3 meter length.
5, Feeding line has servo clamping mechanism, the most front-end is 3m roller table