Soft Gelatin Softgel Paintball Encapsulation Machine

Performance characteristics of JR50 equipment

I. Oil bath electric heating spray body (patented technology)

1. The spray body temperature is uniform, the temperature is stable, and the temperature fluctuation is guaranteed within ≤ 0.1 ℃

(Uneven temperature caused by the ball big and small head, false seam and other issues).

2. Due to the high temperature accuracy, the film thickness can be reduced by about 0.1 mm (about 10% gelatin can be saved).

II. Automatic adjustment of charge by computer

1. Automatic adjustment of loading, saving time and raw materials.

2. The loading accuracy is high, and the loading accuracy is ≤± 1%, which greatly reduces the loss of raw materials.

III. The hardness of reversing plate, upper and lower body, left and right cushion strip reaches hrc60-65

1. It is suitable for users to produce all kinds of liquid suspension of traditional Chinese medicine, greatly improving the service life.

IV. Mold locking disc (three-point locking)

1. After locking, it will never run the line. At the same time, it has fine-tuning function.The operation is very simple.

V. Micro lubrication system (reduce paraffin oil consumption, save cost)

1. The oil quantity is automatically adjusted according to the speed.

VI. Built in cooling air system, equipped with water chiller.

VII. Rubber roller adopts separate frequency conversion speed regulation

1. If the quality of glue is not good in production, it can be solved by adjusting the speed of rubber roll.

VIII. Cold air shaping design of pill delivery area,

1. Avoid wrapping mesh glue on the drawing shaft to make the capsule more beautiful.

IX. A special inclined bucket is used in the lower part of the mould, which is very convenient for cleaning.

X. The feed pump and the machine head are driven from the outside, so the lubricating oil in the feed pump will not enter the machine head. (feed pump independently sealed)

Technical parameters of JR-50 desktop experimental soft capsule machine

(1) Desktop soft capsule host (pill making system): the host adopts PLC touch screen human-machine interface control and liquid crystal display (including one refrigerator, one rubber wheel and one mould)

Production capacity: 5000 capsules / hour

Dimension of rolling die: Φ 64 × 75mm

Speed of rolling die: 0-4 rpm frequency conversion control

Liquid single plug supply: 0-2ml

Accuracy of finished capsule loading: ± 1%

Equipment power: 1.5kw

Power supply system: three phase AC220V 50HZ

(2) Shaping rotary cage (shaping system)

Size of drying rotating cage: Φ 320x450mm

Drying rotating speed: 16rpm

Equipment power: 0.09kw AC220 V

Fan power: AC220 V, 50 Hz, 40 W

(3) Glue tank (glue system), (equipped with an experimental water ring vacuum pump, an oil-free silent air compressor)

Effective volume in the barrel: 40L

The allowable pressure in the barrel: - 0.09mpa ~ + 0.06mpa

Heating power: 1.5kwac220 V

Mixing power: 0.1kwac220 V

Outer diameter: ￠ 450 × 1200 mm)

(4) Air dry barring (PE products)

Trolley size: 755 × 489 × 20 (mm)

Pallet size: 750 × 485 × 55 (mm)

Quantity: 20 pieces

(5) Working platform table (stainless steel 304 products)

External dimension: 1200 * 600 * 800

(6) Colloid mill

Fineness: 20-70 μ M

Speed: 3200 rpm

(7) Water chiller

Refrigeration temperature: - 5-16 degrees

Power: 1.1kw