Bilayer Pelletizer Salt Herb Multi Station Rotary Tablet Press Machine

high speed rotary tablet press machine HSZP pill press with Siemens PLC touch screen D tooling

Main features of HSZP series high speed rotary tablet press machine

High rotating speed, double-sided tablet, and the production efficiency is high; can meet the requirements of pharmaceutical factory mass production.

1. The highest pressure is 80KN, with 60KN pre-pressure.

2. Installed pressure sensors on the pressure wheel parts, accurately shows the average working pressure of the tablets through the amplifier and display screen; while you can set the maximum working pressure, when the operating pressure exceeds the set value, the machine will emergency stop automatically, play a protective role.

3. Equipment lubrication part adopts electric lubrication pump, measurement and other automatic lubrication system, can supply the oil to the part which has a relative friction movement, such as the upper and lower rail, punch roller, punch and role of rotary table, and can according to the actual work needs in a timely manner on the touch screen to adjust the lubrication of frequency and time, in order to obtain the best lubricating effect, reduce noise, prolong the life of parts.

4. Control part adopts programmable controller, the operation panel touch screen with color, convenient and intuitive. The operation of the display screen as the user interface can display the main technical parameters, the average pressure, filling amount, the thickness, etc.; Set the turntable running parameters, such as speed, maximum working pressure, lubrication control parameters such as frequency and time; Can fast locate the fault point, show the cause of the problem and elimination method, improve the efficiency of maintenance.

5. Mechanical parts: the material key parts (material):
Copper rail material adopted specially formulated casting a military enterprise, improve the wear resistance.

The top cap, turntable, rail, track plate, main body and so on, adopts unique technology of casting by a sole proprietorship enterprise of Japan. By analyzing metallographic experiment, uniform material internal molecular structure of the body, tight, no bubble, trachoma and crack, inner pressure and reliable, the casting surface level off, smooth. Main shaft adopts special mark of forgings, small deformation and good rigidity.

6. The processing technology of the mechanical parts:
Copper track, on the roof, turntable, rail, rail bridge, the main body and other major parts adopt precision machine tools (machining center), the processing dimensional accuracy is high.

7. The improvement of pressure wheel and wheel frame structure:
Native roller frame structure change of the current tablet press is widely used form of leveraged (or pole type), using column type structure, its advantage is pressure point, pressure big, less noise and small volume etc.

8. Changes in the structure of rotary table:
Native turntable structure change of the current tablet press is widely adopted in the structure of the die for the blind hole, fission turntable adds a block template, make the original die in blind holes for the straight hole. Although increased turntable processing difficulty, but the effect is obvious. Its advantage is in the depth of the die, the die after installed to the turntable in the die is in the same plane, plane and plane rotary table can ensure the into each mold grain filling volume, make the pressure of the weight of each product.

9. Appearance after industrial stereo modeling design, safety tips humanized design, novel, beautiful and easy.
10. Control system (electrical part)
In order to improve the electrical components and improve the system reliability and stability of the main components are sourced currently trustworthy brand in the world, such as: PLC and touch screen are Siemens brand, inverter is Invt, and switch, breaker etc are Omron products.

Main technical parameters