Defensive Army Welded Hesco Barrier Blast Wall

Fabric High Security Army Welded Blast Wall Fencing

Blast Wall Fencing Brief Introduction

The Blast wall fencing also named as the HESCO MIL,Hesco barrier,or Hesco bastion,is a modern gabion primarily used for flood control and military fortifications. It is made of a collapsible wire mesh container and heavy duty fabric liner, and used as a temporary to semi-permanent levee or blast wall against small-arms fire and/or explosives. It has seen considerable use in Iraq and Afghanistan.

Blast Wall is a prefabricated, multi-cellular system, made of zinc coated steel welded mesh and lined with non-woven geotextile.Units can be extended and joined using the provided joining pins.It is easy installed with using minimal manpower and commonly available equipment.After extended,it is filled into sand,stone,then hesco barrier like a defence wall or bunker,it is widely use in military to protect safety.

Originally designed for use on beaches and marshes for erosion and flood control, the HESCO barrier quickly became a popular security device in the 1990s. HESCO barriers continue to be used for their original purpose. They were used in 2005 to reinforce levees around New Orleans in the few days between Hurricane Katrina and Hurricane Rita. During the June 2008 Midwest floods 8,200 metres (9,000 yd) of HESCO barrier wall were shipped to Iowa. In late March, 2009, 10,700 metres (11,700 yd) of HESCO barrier were delivered to Fargo, North Dakota to protect against floods. In late September, 2016, 10 miles of HESCO barriers were used in Cedar Rapids, Iowa, for the fall flood of 2016.

Specifications

Size

Application

Defensive Walls
Forwawrd operating bases
Accommodation bunkers
Perimmeter security
Blast and ballistic protection
Command& control centres
Training grounds & shoot house
Military compounds
Ammunition storage 
Explosive traverses
Vehicle check points 
Hostile vehicle mitigation 

Feature

The surface can do there types :1) hot dip galvanized after welded the zinc coating can reach 400g/m2 2) pre-galvanized wire  welded,zinc coating can reach 40-60g/m2

Produce process

Purchase the raw material wire--Zn/Ai coating test--straingting--cutting--welding panel--spring installed--attached woven fabric--packing--Loading

Packing terms

1. Panel all packing with the pallet (steel pallet or wooden pallet)

2. bulk in the container

Quality Control Process

1. Raw material test the Zn/Ai

2. Semi-finished product test the size and quality

3. Finished Product’s Test the surface adhesive force (usually the post surface test )

4. Finished Product’s installation

Service

Product Service

Our products offer 10 YEARS GUARANTEE.

Product customization services

We can customize products according to your requirements, including design and drawing.

After-sales service

Our after-sales service start immediately after signing the contract.

1.No matter FOB or CIF the price term is we would try our best to find a lowest freight cost for customers' reference.

2.The third-party inspection always gets real and true data from us and we will send production photos to customers if there is no inspection from the third-party.

3.Do our best to help customer arrange the shipment and customs clearance.

4.Installation, maintenance and repair instructions with full information.