ORIGINAL SMT MACHINE SPARE PARTS FUJI CP6 SPRING WPA1721

ORIGINAL SMT MACHINE SPARE PARTS FUJI CP6 SPRING WPA1721

Product Specification:

Supply Ability:
Supply original new FUJI spare parts at  reasonable cost:

• FUJI A5164A O RING S26
• FUJI A5165A O RING S28
• FUJI A5166A O RING S30
• FUJI A5167A O RING S39
• FUJI A5168A O RING S40
• FUJI A5169A O RING S42
• FUJI A5170A O RING S53
• FUJI A5171A O RING S15
• FUJI A5175A O RING NO.2/ KURODA FOR H1061A+MPH-5040 PKG 10
• FUJI A5176A O RING NO.3/ KURODA FOR H1061A+MPH-5040
• FUJI A5177A O RING NO.4/ KURODA FOR H1061A+MPH-5040
• FUJI A5178A O RING NO.1/ KURODA FOR H1061A+MPH-5040
• FUJI A5198A O RING FOR MDV235-NP(DFPH0710)
• FUJI A5553A O RING P21 SILICON FOR FGL (P-21) (P-21)
• FUJI ABFCA3100 TAPE GUIDE QP/ 8MM
• FUJI ABFCA3107 TAPE GUIDE
• FUJI ABFCA3300 LEVER (QP2) (QP2)
• FUJI ABFCA3306 LEVER
• FUJI ABFCA3400 LINK ASSY
• FUJI ABFCA3402 LINK
• FUJI ABFCA3600 TAPE GUIDE QP/ 8mm/ 1,0
• FUJI ABFCA3606 TAPE GUIDE
• FUJI ABFCA3700 LINK ASSY
• FUJI ABFCA3701 LINK ASSY
• FUJI ABFCB3100 TAPE RETAINER QP/ 12 MM-2,5 (QP2) (QP2)
• FUJI ABFCB3108 TAPE GUIDE 2.5Φ0
• FUJI ABFCB3200 TAPE RETAINER QP/ 12 MM-4,0

SMT Advantages:
Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board.
Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size.

1. Good mechanical performance under shock and vibration conditions (partly due to lower mass, and partly due to less cantilevering)
2. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.

3. Better EMC performance (lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance.

4. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

5. Lower initial cost and time of setting up for mass production, using automated equipment.