E9630721000 Cyberoptics Lahd ASM For JUKI 750 Laser 3 Months Warranty

E9630721000 Cyberoptics Lahd ASM For JUKI 750 Laser 3 Months Warranty

Product Specification:

Supply Details:

Supply&repair all Juki spare parts at a lower price:

• JUKI 570 (620) LASER 6604035
• JUKI 570 (620) LASER LAM-35-21
• JUKI 570 (620) LASER LAM-35-22
• JUKI 620 (740) LASER 6604061
• JUKI 730 (750) LASER E9631721000 6604054
• JUKI 740 LASER 6604097
• JUKI 740 LASER LAM-35-21
• JUKI 750 LAHD ASM E9630721000
• JUKI 750 LASER E9631721000 6604054
• JUKI 760 FOCUSE MODULAR LA UNIT E9635725000
• JUKI 760 LASER SENSOR (TOP CONNECTOR) E9636725000 6604062
• JUKI 760 LASER SENSOR (TOP CONNECTOR) E9636725000 6604096
• JUKI 2010 (2020) LASER E9611729000 8000286
• JUKI 2010-2060 (FX-1) MNLA E9611729000 8010518
• JUKI 2020 NFMLA LASER 40003264 6604096
• JUKI 2020 NFMLA LASER 40003264 8005674
• JUKI 2020 (2030) LASER E9611729000 8006268
• JUKI 2050 MNLA LASER E9611729000 8010518
• JUKI 2060 (2080) FMLA 40003264 8010519

Stock Advantages:

SMT Advantage:
Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board.
Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size.

1. Good mechanical performance under shock and vibration conditions (partly due to lower mass, and partly due to less cantilevering)

2. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.

3. Better EMC performance (lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance.

4. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

5. Lower initial cost and time of setting up for mass production, using automated equipment.