Used / Original New FUJI CP6 Camera Power Supply IK-C40MS In Stock

Description:

Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board.

Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size.

This technology is known as Surface Mount Technology, SMT and SMT components. Virtually all today's equipment that is manufactured commercially uses surface mount technology, SMT, because it offers significant advantages during PCB manufacture, and in view of the size the use of SMT components enables far more electronics to be packed into a much smaller space.

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Product Specification:

Details:

Supply Ability:
Supply original new FUJI spare parts at better price:

Business Scope:

1. Nozzles, Feeders, feeder parts, cutters, filters, belts, motors, valves, sensors, camera, board cards and other machine parts...

2. Feeder calibration jigs, feeder storage carts, IC Tray feeders, stick feeders, feeder loading unit,

3. Printer squeegee holder/ blade, clamp foil and other printer parts.

4. ESD splice tape, tool, stencil clean wiper/ paper, PCB magazine...

5. SMT Peripheral equipment (PCB separator, solder paste mixer, Automatic SMD chip counter, etc... )

6. SMT product recycling (feeder nozzle used machine...)