MP524 Benq Projector Bulbs

MP524 Benq Projector Bulbs

Benq Peojector Bulb 5J.J1V05.001 For Sale Compatible MP524 MP525 MP525P MP525ST MP525V MP575

The Benq 5J.J1V05.001 projector Lamp (UHP210/160W 0.9 E20.9), is compatible with the Benq MP524 MP525 MP525P MP525ST MP525V MP575 projectors in portrait mode. The lamp features a rated lifetime of 3000 hours and a maximum output of 8500 lumens in dual-lamp normal mode. Our team provides the best quality products, to provide customers with 100% satisfaction quality service. We are willing to strengthen cooperation with each customer to create a better future.

Specifications:

The projector lamps are completely covered under our 180-day warranty, which protects against any defective products.
We are committed to offering an easy and safe Projector Bulb buying experience that brings enjoyable shopping experience to all our customers.
Warranty does not cover: shipping costs, improper installation including damages incurred while attempting installation, any installation or labor costs, lamps damaged by TV projector malfunction, damage due to abuse, lightning or acts of nature, misuse, electrical stress or power surges, loss of use, lost profits.

Warm Noted:

Be sure to use an 5J.J1V05.001 Projector Lamp for replacement.

Be sure to turn off the unit and unplug the power cord before replacing the lamp

The lamp remains hot after the unit is turned off with the TV.

If you touch the lamp, you may burn your fingers. When you replace the lamp

Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp

If you touch it, wipe off the fingerprints with a soft cloth

Installation:

1. Turn off the Projector and unplug the AC power cord.

2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.

3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.

4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.

5. Close the lamp cover, and then tighten the screws

6. Plug in the AC power cord.