NP300 NP400 NP400G NP400J NP07LP Projector Lamp

NP07LP Original Lamp For NEC Projector NP300 NP400 NP400G NP400J

NEC projector lamp NP07LP (NSHA210 ), brand New projector lamp, top quality with high brightness, lamp life up to 2500 hours, QC test of all projector lamps. Comptabile with NP300 NP400 NP400G NP400J NP410W NP410WJ NP500 NP500J NP500W NP500WJ NP500WS NP500WSJ NP510C NP510C+ NP510W NP510W+ NP510WJ NP510WS NP510WSG NP510WSJ NP600 NP600J NP600S NP600SJ NP610 NP610C+ NP610J NP610S NP610S+ NP610SG NP610SJ​. Our team provides the best quality products, to provide customers with 100% satisfaction quality service. We are willing to strengthen cooperation with each customer to create a better future.

Specifications: 

The projector lamps are completely covered under our 180-day warranty, which protects against any defective products.
We are committed to offering an easy and safe Projector Bulb buying experience that brings enjoyable shopping experience to all our customers.
Warranty does not cover: shipping costs, improper installation including damages incurred while attempting installation, any installation or labor costs, lamps damaged by TV projector malfunction, damage due to abuse, lightning or acts of nature, misuse, electrical stress or power surges, loss of use, lost profits.

Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriveen open the r, and thlamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.

Warm Noted:
Be sure to use an ELPLP85 Projector Lamp for replacement.
Be sure to turn off the unit and unplug the power cord before replacing the lamp
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth