Self Supporting Aerial ADSS Fiber Optic Cable 12 /24/48 cores Span
100m
product desctirption
ADSS cable is made of non-metallic material and self-supporting
with the aerial power transmission line. The tension resistance
material is aramid yarn with high elasticity modules. And
optimizing structure can deploy the weight of the cable and its
mechanical and physical properties appropriately and minimize the
load on the tower. Loose tube construction, tubes jelly filled,
elements (tubes and filler rods) and water blocking yarn laid up
around non-metallic central strength member,polyester yarns used to
bind the cable core, water blocking tape longitudinally wrapped
around the cable core, thenaramid yarn reinforced and PE outer
sheath.
Characteristics
· Can be installed without shutting off the power
· Excellent AT performance, The maximum inductive at the operating
point of AT sheath can reach 25kV
· Light weight and small diameter reducing the load caused by ice
and wind and the load on towers
and backprops
· Large span lengths and the largest span is over 1000m
· Good performance of tensile strength and temperature
· The design life span is 30 years
·Application
The actual status of overhead power lines is taken into full
consideration when ADSS cable is being designed. For overhead power
lines under 110kV, PE outer sheath is applied. FOR power lines
equal to or over 110kV, AT outer sheath is applied. The dedicate
design of aramid quantity and stranding process can satisfy the
demand on various spans.
·Standards
ADSS cable complies with Standard IEEE P 1222 as well as IEC
60794-1.
ADSS detail pictures showes:
single jacket ADSS
double jackets ADSS
ADSS data sheets
Structure and Technical Specifications ADSS-SJ(50-150M)
Ref. Outer Diameter (mm) | Ref. Weight (kg/km) | Rec. Daily Max. Working Tension (kN) | Max Allowable Working Tension (kN) | Break Strength (kN) | Strength Member CSA (mm2) | Modulus of Elasticity CSA (kN/mm2) | Heat Expansion Coefficient (x10- 6/K) | Suitable Span Meter |
PE Jacket | AT Jacket | A | B | C | D |
11 | 110 | 120 | 1.0 | 2.5 | 8 | 3.0 | 6.6 | 2.1 | 120 | 80 | 100 | 80 |
11.5 | 115 | 125 | 1.5 | 4 | 10 | 4.5 | 7.3 | 1.8 | 180 | 120 | 150 | 120 |
12 | 120 | 130 | 2.5 | 6 | 15 | 7.5 | 8.3 | 1.5 | 250 | 150 | 290 | 150 |
Structure and Technical Specifications ADSS-DJ(50-750M)
Ref. Outer Diameter (mm) | Ref. Weight (kg/km) | Rec. Daily Max. Working Tension (kN) | Max Allowable Working Tension (kN) | Break Strength (kN) | Strength Member CSA (mm2) | Modulus of Elasticity CSA (kN/mm2) | Heat Expansion Coefficient (x10- 6/K) | Suitable Span Meter |
PE Jacket | AT Jacket | A | B | C | D |
12.5 | 125 | 136 | 1.5 | 4 | 10 | 4.6 | 7.6 | 1.8 | 160 | 100 | 140 | 100 |
13.0 | 132 | 142 | 2.25 | 6 | 15 | 7.6 | 8.3 | 1.5 | 230 | 150 | 200 | 150 |
13.3 | 137 | 148 | 3.0 | 8 | 20 | 10.35 | 9.45 | 1.3 | 300 | 200 | 290 | 200 |
13.6 | 145 | 156 | 3.6 | 10 | 24 | 13.8 | 10.8 | 1.2 | 370 | 250 | 350 | 250 |
13.8 | 147 | 159 | 4.5 | 12 | 30 | 14.3 | 11.8 | 1.0 | 420 | 280 | 400 | 280 |
14.5 | 164 | 177 | 5.4 | 15 | 36 | 18.4 | 13.6 | 0.9 | 480 | 320 | 460 | 320 |
14.9 | 171 | 185 | 6.75 | 18 | 45 | 22.0 | 16.4 | 0.6 | 570 | 380 | 550 | 380 |
15.1 | 179 | 193 | 7.95 | 22 | 53 | 26.4 | 18.0 | 0.3 | 670 | 460 | 650 | 460 |
15.5 | 190 | 204 | 9.0 | 26 | 60 | 32.2 | 19.1 | 0.1 | 750 | 530 | 750 | 510 |
Optical characteristic
Fiber type | Attenuation (+20℃) | Bandwidth | Numerical aperture | Optical cable cut-off wavelength |
---|
@850nm | @1300nm | @1310nm | @1550nm | @850nm | @1300nm |
---|
G.652 | --- | --- | ≤0.36dB/km | ≤0.22dB/km | --- | --- | --- | ≤1260nm |
G.655 | --- | --- | ≤0.40dB/km | ≤0.23dB/km | --- | --- | --- | ≤1450nm |
50/125µm | ≤3.3dB/km | ≤1.2dB/km | --- | --- | ≥500MHz·km | ≥500MHz·km | 0.200±0.015 NA | --- |
62.5/125µm | ≤3.5dB/km | ≤1.2dB/km | --- | --- | ≥200MHz·km | ≥500MHz·km | 0.275±0.015 NA | --- |
FAQ
1. Are you tradning company or manufacturer?
We are the manufacturer with 10 years' experience ,we are
specialized in research,development and production
for fiber optic cable,drop cable and path cord ect. Our factory is
in Guangzhou city,welcome to visit us!
2. About the quality?
We will delivery before tested every fibers when finished
production.
After price confirmation, you can require for free samples to check
our quality.
3. Can you accept small order?
Yes, small order is available. We support new project of our
customers, as we know business is always from small order.
4. What is your delivery time?
Usually about 3-7days working days,it mainly depend on order
quantity.
But pls be assured that we will arrange your goods asap after your
payment .
Application: Self-supporting overhead