EPS Sandwich Panel 38kw Cleanroom Wall Panel Machine

Clean Room Panel Line

General specification:

Steel sheet thickness: 0.3-0.6mm

Steel sheet width: ≦1260mm

Core material: EPS panel

Working speed: 2-6m/ min

Power: 38kw

Production Dimension: 32m*2.3m*2.8m

Product thickness: 30-200mm

Annual output: 600,000 m2

Parts Listing:

The Sandwich Panel Production Line is composed of four (5) main sections, such as, STEEL DECOILER, EPS LOADER AND EDGE MILLING MACHINE, STEEL LOCK FORMING MACHINE,SANDWICH PANEL LAMINATOR, CIRCULAR SAW PANEL CUTTER ,ROLLING TABLE.

The production line is 26000mm x 4000mm x 2350mm.

III . THE MAIN PARTS OF THE PRODUCTION LINE:

1. STEEL DECOILER: 2Pcs.

Type of Decoiler: Manual Expansion

Width of coil: ≤ 1250mm

Weight of coil: ≤ 5 mt

2. EPS LOADER AND EDGE MILLING MACHINE: 1Pcs.

Type of milling: Milling round knife

Numbers of miller: Left and right two piece

Driving Motor Power: 0.75 Kw x 2

3. STEEL SQUARE LOCK FORMING MACHINE(Top and bottom): 1Pcs.

Roller station: 8 stands

Roller material: GCr15 Alloy

Width adjusting range: 900-1250mm

Driving and Transmission: Gear and K type Gear motor

Cross moving guide: Linear bearing

4. SANDWICH PANEL LAMINATOR: 1Pcs.

4.1 LAMINATING ROLLER:

Rubber roller Diameter: 150mm

Thickness of composite rubber layer: 10mm

Number of rollers: 16 pairs

4.2 GLUE SPRAYING DEVICE:

Number of pump: 4 sets (top & bottom each 2)

Required Power: 0.37 Kw

Flow volume of glue: 0 – 0.4 kg per pump

Type of flow volume control: Frequency inverter

Scale of glue: (white) 1: (brown) 1

Spraying pipe: Plastic spraying nozzle

4.3 GLUE UNIFORMITY DEVICE: Speed of spreading: 80 times/min.

Required Power: 0.5Kw x 3

4.4 PLASTIC FILM COATING DEVICE: Conical push pin by wheel adjusting

4.5 DUST SUCTION FOR EPS WASTE:

Type of suction: Blowing fan

Required Power: 2.2 Kw

5. CIRCULAR SAW PANEL CUTTER: 1Pcs

Type of Cutting Circular Saw and rotating blade

Required Power 1.5 Kw x 2

Thickness of Panel 40mm – 200mm

Length of Panel 1200mm – 30000mm

Movement of Cutter: 2000mm (cylinder distance)

Type of operating: Touch screen and PLC

Overall weight of cutter 2.5 mt