Edge Grinded Toughened Tempered Glass
|
Cut to size toughened tempered Glass , edge grinded , safety corner Description:Toughened tempered glass is often used in applications where using standard glass could pose a potential danger. Toughened tempered glass is stronger than standard glass and does not shatter into large shards when broken. This is important, because small shards can greatly minimize potential danger in the case of a break. Feihong set a standard of the fragment state in 50*50mm to judge if it’s qualified toughened tempered glass based on global Electrolux oven glass Standard, GE standard, BSH Standard, British BS3193 Standard, etc. Manufactured through a process of extreme heating and rapid cooling, toughened tempered glass is much harder than normal glass.
Features of toughened tempered glass: Has the unique gloss appearance, good light transmission
Toughened Tempered Glass Manufacturing Process
Toughened Tempered Glass usage area:
Quality Inspection Item 1, Toughened Tempered Glass Appearance, In the daytime (or in the case of similar brightness), observe the toughened tempered glass vertically for 5 seconds with naked eyes or with the aid of glasses from a distance of 50cm or a distance of one arm length. No dirt or scratch, edge and corner, printing effect. 2, Printing appearance: the toughened tempered glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible. 3, Evenness of toughened tempered glass: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform; 4, Granularity test: two pieces of tempered glass are selected for each batch of CNC tempered glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm. 5, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the CNC tempered glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.
|
||||||||||||||
Product Tags: Edge Grinded Toughened Tempered Glass Silkscreen Toughened Tempered Glass Silkscreen Transparent Toughened Glass |