20mm 0.02N.M Two Phase Bipolar NEMA Stepper Motor

20mm 2 phase hybrid NEMA8 bipolar stepper motor1.8 step motor

Product description of 1.8 step motor

1. Accurate Speed Control

The rotational speed of the stepping motor can be precisely controlled ,By controlling the frequency of the electric pulse.

2. Forward/Reverse Rotation,Pause and Hold

The forward /reverse rotation of the stepping motor can be controlled by the input sequence of the controlled electric pulses.

3. Forward/Reverse Rotation,Pause and Hold

The forward /reverse rotation of the stepping motor can be controlled by the input sequence of the controlled electric pulses.

4. Longer Life

Stepping motor is a mechanical structure,which does not need be changed by electric brush or Hall sensor,thus reducing the probability and increasing the motor life.Stepping motor life usually determined by the life of the bearing.

5.Material quality: The coat is 304 stainless steel, the water jacket is the high compression casting aluminum tube, the red copper coil.

Specifications 

Why choose stepper motor

While these applications are the most common, they’re a fraction of what stepper motors can be used for. Generally speaking, any application that requires highly accurate positioning, speed control, and low speed torque can benefit from the use of stepper motors.

While servo motors have their place in industry as well as numerous advantages of their own, stepper motors are an ideal solution in many applications.

Stepper motors are a robust motion control technology and can be found inside of many common machines and equipment. To learn more, browse stepper motors at Prostepper from the world’s leading suppliers.

Quality control process:

1. Incoming inspection: The inspection shall be conducted according to the Requirements of the Incoming Inspection Specification or the product drawing

2. Monitoring and measurement of production process (self-inspection - inspection - batch production)

3. Final inspection and test

4. All inspectors must be trained and then put on duty

5. Nonconforming products shall be executed in accordance with Nonconforming Product Control Procedures

Raw material inspection

Inspecting according to the standard of testing raw material or the drawing

Monitoring and measurement in production process

Self checking-tested by QC-Batches production

Final checking and make experiment

All products should be through testing by the professional equipment