Product description of encoder stepper motor
High reliability, easy maintenance.Motor rotor structure accurate,
no loss of step.Rotor special material, not stuck machine.
Accurate Speed Control
The rotational speed of the stepping motor can be precisely
controlled ,By controlling the frequency of the electric pulse.
Online testing of technical parameters to ensure the consistency of
data product parameters
Accurate position Control
The angular displacement of the stepping motor can be precise
controlled by the number of electrical pulses.Angle accuracy can be
controlled within ±0.09°without any feedback devices.
1.8 degree stepper motor 2 phase hybrid 20mm NEMA8 Encoder stepper
motor
Encoder stepper motor of Specifications
| Holding Torque | 0.02N.m |
| Related Current | 0.6A/Phase |
| Resistance | 6.5Ω/Phase |
| Inductance | 2.2MH/Phase |
| Inertia | 1.6g.cm² |
| Index | √ |
| Output | Differental |
| Encoder Resolution | 1000CPR |
- 1. Shaft Dia= 5mm
- 2. Step Angle: 1.8
- 3. Phase Current 1.2A
- 4. Phase Resistance: 1 .5Ohm
- 5. Phase Inductance: 2.8mH
- 6. Holding Torque: 40N.cm
- 7. Braking Torque: 2.2N.cm
- 8. Rotor Inertia: 54g.cm32;
- 9. Wire: 4(Blue, green, black, red)
- 10. Max. Temperature Rise: 80"C (rated current, 2 phase on)11.
Operating Temperature: -20*C-+70"C
- 11. Insulation Resistance: 100 MQ Min., 500VDC
- 12. Radial Clearance: 0.02Max, (450g-Load)
- 13. Axial Clearance: 0.08Max. (450g-Load)
Quality assurance:
- 1. All stepper motors have CE and RoHS certification
- 2. All motors are tested by a toasting machine for 72 hours
- 3. All the motors will be shipped after testing
Primary Competitive Advantages:
- Green Product
- Military Specifications
- Packaging
- Price
- Product Features
- Product Performance
- Prompt Delivery
- Quality Approvals
- Service
- Small Orders Accepted
- Brand-name Parts
- Origin
- Experienced Staff
Encoder stepper motor
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper
motor drive boards and also drive either motor (if required) in the
half step mode i.e. 0.9° per step resulting in higher resolution,
greater performance stability and faster stepping rates. Direction,
velocity, acceleration/deceleration can be controlled by a stepper
motor controller.,Applying the correct electrical pulse sequence to
the windings of the stepper motor results in a 1.8° step angle
rotation of the spindle (i.e. 200 steps per revolution). When
correctly loaded and driven these motors will produce discrete
output steps. The number of steps and speed of rotation are
determined by the number of pulses and frequency of the input
signal. This provides an ideal method for speed and position
control. The motors are directly compatible with stepper motor
drive boards.,
Tips: What is stepper motor?
- Stepper motor is an actuator transforming electric pulse into
angular displacement. Popularly, when receiving a pulse signal, the
stepper motor will rotate a fixed angle (namely ''stepping angle'')
according to the direction set for the stepper motor. The angular
- displacement volume can be controlled by controlling the pulse
number to achieve the purpose of positioning accurately. In the
meantime, the rotational velocity and acceleration of motor can be
controlled by controlling the pulse frequency to achieve the
purpose of speed control.
