180 Degree 90 Degree Roller Conveyor

Quality Curved Rubber Belt Conveyor 60 degrees 90 degrees 180 degrees Turning Belt Conveyor for logistic need  

Quick Details  of Curve Conveyor

The curved belt technology is incredibly versatile and reliable. The curved belt conveyor systems will achieve angles ranging from 30° to 270° using horizontal or spiral curves. These curves make the most of available space, while Spiral curves also have the advantage of rapid elevation in a very small floor space.

The belt curve system facilitates long life, high haulage performance capabilities, running with less stress over conical drums. The roller drive chain is guided along the outer edge of the belt, at the same time serving as a belt guide providing a positive locking roller chain /drive, transmitting high tensile strength forces where it is needed most.

Curved belt conveyors are made in modules; they are reliable, adaptable and can be easily integrated into most conveyor systems.

RANGE
Standard belt widths: From 100mm to 2000mm
Belt speed: Up to 30m/minute.

 
Specification  of  Curve Conveyor

Details of Curve Conveyor

Our Products are:

Belt conveyor

Types:

Groove belt conveyor, flat belt conveyor, climbing belt conveyor, turning belt conveyor, telescopic belt conveyor, inclined belt conveyor.

Advantage:

It works smoothly and no relative motion with articles to avoid damage when conveying. High efficiency, low noise, compact, easy to maintain, energy saving and cost saving.

Roller conveyor

1. Types: gravity roller conveyors, driving roller conveyors, electric roller conveyors, inclined conveyors and turning conveyors.

2. The standard diameters are Φ20mm, 25mm, 32mm, 38mm,42mm, 50mm, 57mm, 60mm, 76mm, 89mm, 110mm, 130mm etc.

3. The diameter of the turning conveyors are 300mm, 600mm, 900mm, 1200mm.

4. Frame of conveyor: carbon steel painted, stainless steel or Aluminum.

5. Transmission mode: sprockets, O type belt, synchronous belt etc.

6. Speed: variable or constant.

Conveyor roller

1. Types: gravity rollers, driven rollers, electric rollers, accumulating rollers and taper curve rollers.

2. The diameters are from Φ18mm to Φ89mm,

3. Material: carbon steel, Aluminium, stainless steel, PVC etc

4. Application: convey light or middle units or heavy material like 1.5 ton pallets.

5. Assembling types: spring shaft, mortise, threaded, pin / hexagon / tube shaft.

6. Rubberized, PU lagged, galvanized, chromeplated.

Drum motors

Drum motors / Electric rollers for rolling conveyors, belt conveyers and for higher requirements.

The diameter: Ø38, Ø50, Ø60, Ø76, Ø80, Ø113, Ø138, Ø165, Ø216.

The power: from 15 W to 1.1 Kw. The speed: 1~300m/min. We also can OEM the rollers by the requirements.

Flying wheel conveyors have been widely used in need of often moving, requirements for light weight occasion with cheap, durable, not easy to be damaged and exquisite appearance.

Our flying wheels have follwing types:

1. Stamping metal flying wheels; 2. Cutting metal flying wheels; 3. POM flying wheels; 4. Rubberized flying wheels; 5. PE, ABS, Nylon wheels.

Spiral conveyor

Chain spiral conveyor, net belt spiral cooling conveyor, roller spiral conveyor, single and double spiral conveyor.
Double spiral conveyor has two parallel tracks, each of them is independently driven by a motor, which can work at different speed or in the opposite direction. It is more flexible.