rubber tile floor curing press
| Type | XLB-D550×550x4 | XLB-D680*810*3 | XLB-D1300X1300X2 |
| Motor power(KW) | 3 | 3 | 3 |
| Total pressure(MN) | 0.5 | 1.0 | 2.0 |
| Plate size | 550*550*4 | 680*810*3 | 1300x1300x60mm |
| Plate clearance | 150mm | 150mm | 180mm |
| Working layer number | 4 | 3 | 2 |
| Piston stroke | 400mm | 400mm | 300mm |
| Plate pressure | 1.65Mpa | 1.8Mpa | 1.18Mpa |
| Heating | Electric | Electric | Electric |
| weight | 3600Kg | 4500Kg | 9500kg |
This production need machines:
Rubber Kneader→Bucket Elevator→Rubber Mixing Mill→Cooling Machine
→Rubber tile Vulcanizing Press
Rubber Tile Press Machine Usage:
1, The frame type plate vulcanizer applies to vulcanize all kinds
of rubber and plastic mould products as well as non-mould products.
2, Applicable line: Rubber Sheet, Oil Seal, O Ring, Gasket, Engine
Mountings, Hardware Rubber, Molded Rubber Parts and etc.
Desciption:
1. This vulcanizing machine is used for all kinds of vulcanizing
mould, rubber and plastic mould products, and non-mould products.
2. The machine is in frame structure with below pressing form
(upwards). Under the working hydraulic pressure, the embolism
ascends
To make hot plate close for getting pressure, while the embolism
descends (namely hot plate turning on) by deadweight of hot plate,
Platform and embolism to drive working fluid to fuel reserve tank
to achieve the aim of descending (namely turning on).
Our Services
Our engineers can design target machines for customers and send
them the drawing to confirm. We are always on the side of saving
your cost.
In the process of production, we will take photos and send to
customers for their track the progress.
Documents such as packing list, commercial invoice, and bill of
lading etc. will be sent after the delivery.
We could supply free English foundation DWG, installation drawing,
user guide, maintenance manual and part drawing.
We supply overseas engineer service and help to train your workers
to operate the machine.
FAQ
1. Delivery time of the rubber machines?
This is specially designed machine according to your specific
requirement.
From engineer designing to production completion, it needs about 25
to 35 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very
beginning to the end of production.
Every machine will be fully assembled and carefully tested before
shipment.
3. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand
components to keep our machine in perfect working condition.
4. Are you able to give installation and commissioning overseas?
How long time will it take?
Yes, we can supply overseas service and technical support but
customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant usually takes about 30 days.
