Swing Access Control Turnstile

Swing Access Control Turnstile

304 Stainless Steel Bi-Direction Swing Barrier Speed Security Gate Smart Turnstile Swing Gate

The swing gate realizes blocking and release by rotating and swinging. The materials are commonly used in stainless steel, plexiglass, tempered glass, and some also use metal plates outsourcing special flexible materials (to reduce the damage to pedestrians). It is mainly used for the management of entrances and exits. The usual application places only allow people to pass, or people who tow luggage, and people with disabilities. Considering that swing gates can achieve wider channel characteristics than wing gates. Most of the swing gate channels can be mixed with pedestrians, bicycles, mopeds, disabled vehicles and other non-motorized vehicles.

Features
1, Fault self-check and alarm prompt function, convenient for users to maintain and use;
2,Through the built-in small button on the main control board, the running status of the device can be programmed;
3, Mechanical structure, induction double anti-pinch function, when the swing arm is in the process of resetting, it will automatically stop or the motor will stop working within the default time, and reset again after the default delay (until reset), and the force is very small ( ≤2Kg);
4, Sound and light alarm function: including illegal entry and trailing alarm;
5, Anti-shock function, the swing arm is automatically locked when it does not receive the opening signal;
6, Swing lever (arm) synchronization function;
7, Automatic reset function. After opening the gate, if there is no pass within the specified time, the system will automatically cancel the user's permission to pass this time. The standard is automatic reset 5 seconds after opening;
8, The channel automatically opens after power off, and automatically closes after power on;
9, It can be connected to a variety of card readers, and can receive relay switch signals to work;
10, One-way or two-way control of personnel entry and exit;
11, Remote control and management can be realized directly through the management

Specification: