Model Is YMJS0211-01 Feather Squeezer Feather Meal Processing
Equipment
Introduction
Screw extrusion dehydrator is a main equipment used
for coagulation and dehydration. It is mainly composed of a screw,
a cylindrical cage shell and a cone. The screw shaft and the output
shaft of the reducer are connected by a flexible coupling. Host
structure and the role of each componentedit The dehydrator is
mainly composed of a screw, a cylindrical cage shell and a cone.
The screw shaft and the output shaft of the reducer are connected
by a flexible coupling.
1. Screw It consists of pitch threads and collars
alternately sleeved on the screw shaft. Each thread and collar are
respectively keyed on the screw shaft. Except for the first section
(feeding zone), which is a three-turn equal-distance continuous
thread, the other sections are single-turn open, and the pitch of
each pitch is different. It gradually decreases from the low
pressure side to the high pressure side, and the hub diameter
gradually increases. To increase the pressure, so as to squeeze out
the water in the rubber.
2. Cylindrical energy shell It is composed of a
castor board composed of cage bars fixed on the frame. The grate
board is divided into 8 sections, each of varying length. The inner
diameter of the cylinder is 18 inches. It is divided into two
halves on the vertical centerline and fastened by bolts for easy
removal for cleaning and maintenance. The cage bars that make up
the castor board are separated by spring sheets to form
longitudinal slits to allow water to flow out. There are scrapers
on the skeletons on the upper and lower sides of the cylinder,
corresponding to the position of the collar on the screw. Its
function is to prevent the rubber from rotating with the screw,
forcing the rubber to change the direction and position of the
advancement, and forming a loose and porous shape. Conducive to
drying. There are four jackets for heating or cooling on the
outside of the cylinder, and the temperature in the machine can be
controlled in zones according to process requirements. In the
production of styrene-butadiene rubber, it is only used when steam
is used to preheat the body before driving.
| name | feather squeezer |
| model | YMJS0211 |
| color | red/black |
| material | S30408 |
