200T Hydraulic Portable Track Pin Press Pin Assembly and Disassembly For Excavator

XDEM 200T Portable Track Pin Press, Hydraulic Master Pin Press for Bulldozer, Excavator

Portable Track Pin Press 200T

PRODUCT DESCRIPTION

Hydraulic track pin press is used for press fitting and repair of the traveling mechanism of construction machinery. Hydraulic track press manufactured by our company is suitable for the assembly and dis-assembly of link chains and shaft sleeves for various crawler construction machinery and equipment. It is an essential equipment for construction machinery maintenance companies.
The portable track link pin press adopts a bidirectional hydraulic device, reducing oil circuit, easy to maintain and repair. It is lightweight, not only suitable for in-plant use but also anywhere on the site, field operations. This device has two models for choice: electric and manual for which users can choose according to their actual situation.

WORKING PRINCIPLE
The track link pin press is a special tool by utilizing the conversion from hydraulic energy into mechanical energy to dis-assembly the track pin of a crawler excavator. Manual, electrical or manual and electrical pump is used as a power source to move the hydraulic jack forward so that the pin can be removed smoothly. Instead of gas cutting and hammering, it ensures that the track is intact. It is an ideal special tool for track excavator maintenance and assembly.
Hydraulic system of electrically driven track press: hydraulic system (pump station) is installed on the right side of the host. The entire hydraulic control system drives the high-pressure pump to input the pressure oil through the motor. After the solenoid reversing valve, the oil is respectively input to enable the cylinder plunger to reciprocate up and down. In the neutral position, the system is unloaded and the oil flow goes into the tank. The press is electro-hydraulic controlled. Extra hand pump can be equipped for field operation without power supply.

100T TRACK PIN PRESS MAIN PARAMETERS

200T TRACK PIN PRESS MAIN PARAMETERS

PRODUCT PICTURE

Standard Parts Included:

Note:

1. Dismantling tooling includes:

Forcng pin: Φ70x150mm&Φ70x100mm;

Guide pin:

For excavators<32T: Φ25x180mm&Φ28x180mm&Φ30x180mm&Φ40x180mm;

For 40T

2. Flow of electric pump:5L/min

Pump capacity: 16L (hand pump);32L (electric pump)