Description1 ApplicationDirect-heaters for Hazardous locations, designed for direct
mounting onto e.g. manifolds etc. - Freeze protection
- Anti-condensation
- Temperature maintenance
2 Features and Advantages- Self-limiting heating elements
- Small dimensions
- No moving parts, no maintenance required, therefore long lifetime
- Suitable for T4 and T3 classifications
- Can be used for 110/240 VAC/DC
3 Remarks- All Cameo Heaters are designed around self-limiting heating
elements. These self-limiting semi-conductor elements are saving
power consumption. Our Cameo Direct-heaters are designed to heat
the installed equipment. If properly selected for freeze
protection, no thermostat will be needed.
- Optional body #5 : 4 holes diam. 5,2 mm. available in Aluminium and
SS range
For easy mounting, at no extra charge - Alternative 316 Stainless Steel heaters can be delivered for the
100-10 Watt range.
Also possible is an aluminium body with four holes drilled through
(body #5), for easy mounting.
Please see below for further technical data.
4 Range | LP-1A | T3 | ca. 115 °C Surface temperature | 100-10 Watt | | LP-2A | T4 | ca. 105 °C Surface temperature | 100-10 Watt | | LP-3A | T4 | ca. 90 °C Surface temperature | 100-10 Watt | | LP-4A | T4 | ca. 70 °C Surface temperature | 100-10 Watt | | LP-0AHP (High Power model) | T3 | ca. 130 °C Surface temperature | 200-20 Watt |
* these temperatures are measured at 20 °C ambient temperature.
5 Technical data | Power | 100-10 Watt or 200-20 Watt for High Power model | | Electrical cable | 3 x 1 sqmm, braided std. | | Material cable | braided silicone, optional: non-braided cable | | Standard length | ca. 1 mtr. Other lengths optional | | Overall dimensions | 78 x 30 x 34 mm (LxWxH) | | Weight | Aluminium heater ca. 350 g., 316 Stainless Steel 360 g. | | Material | black anodized aluminium (A) or 316 stainless steel (S) | | Protection class | II 2G Ex d IIC T4 or T3
II 2D Ex tD A21 IP66 T 135°C or T200 °C | | Certification | KEMA 01ATEX2124X and IECEx DEK 11.0017 | | IP degree | IP 66 | | Voltage | 110/240 VAC/DC | | Ambient temp. range | – 60 °C … + 90 °C | | Optional body #5 | 4 holes diam. 5,2 mm. available in Aluminium range. | | | for easy mounting, at no extra charge. |
| Additional Technical data for the High Power model LP-0AHP, T3, 130
°C: | | | Overall dimensions | 88x36x36 mm (LxWxH) | | Material | black anodized aluminium only | | All other data | the same as standard model |
|
