Display Blurry Screen ultrasonic repairing system Siemens S2000 Medical Solutions Replace RM Board

Display Blurry Screen Siemens S2000 Medical Solutions Replace RM Board

1. Repair time: 2-4 days
2. Warranty: 60 days
3.

The video signal is output from RM to VI and then transmitted from VI to IO. You can start to check from the source RM. From RM to an external monitor, it is also found that the screen is blurred, so it can be determined that it is caused by a fault in RM. Replace the graphics card in RM, and the fault is eliminated.

Repair result: replace the graphics card, and return to normal

Various GE/Siemens/Toshiba/Hitachi/ Biosound ultrasonic boards are within our repair/ maintenance range.
 
Other ultrasound parts related to Siemens that we can offer:

Knowledge Point

The Acuson S2000 is a lightweight ultrasound system with advanced technologies such as Advanced SieClear spatial compounding for enhanced boundary definition and tissue contrast, syngo eSieCalcs native tracking software for measurement accuracy, and Advanced fourSight technology for volumetric imaging . The Acuson S2000 uses pinless sensor connector technology and user ergonomics to facilitate a user-friendly system.

• Three universal sensor ports support 612 micro pinless connectors for legacy, Multi~D matrix array sensors, Hanfay lens technology and fourSight 4D sensor technology
• Electronic transducer selection
• One-handed transducer connection and disconnection
• Ergonomic ports for all sensors
• Aux CW port for 2 MHz and 5 MHz CW

FAQ

How long does an ultrasound machine last usually?

Generally, transducers can last up to seven years with proper maintenance, storage, and transport. This will vary based on manufacturer recommendations.

What information do customers need to offer in advance before repair?

1. The brand and model of the machine

2. Video or pictures of machine malfunction

3. Natural failure or artificial failure (for example, has it been repaired)

4. Accidental failure or frequent failure

5. All machines can do self-test, the same is true for HI VISION Avius and Preirus

6. Whether there is difference between connecting probe or not ( test selectively according to the machine fault, for example, if there is voltage error, the probe can be disconnected for test)