Siemens S2000 No Spectrum When Using Cw Function medical solutions

Siemens S2000 No Spectrum When Using Cw Function Medical Solutions

1. Repair time: 2-4 days
2. Warranty: 60 days
3.

Fault phenomenon: The device can be turned on normally, and the functions are normal except for the cw function, but the cw function is turned on when the heart probe is used, and the probe is placed on the body, there is no frequency spectrum, and the fault video is as follows.

Fault analysis and treatment: The device can be turned on normally, and other functions are normal. It enters the background self-test and finds a CB fault.
Maintenance result: Replace the CB board, and the fault is eliminated.

Various GE/Siemens/Toshiba/Hitachi/ Biosound ultrasonic boards are within our repair/ maintenance range.
 
Other ultrasound parts related to Siemens that we can offer:

Knowledge Point

The Acuson S2000 is a lightweight ultrasound system with advanced technologies such as Advanced SieClear spatial compounding for enhanced boundary definition and tissue contrast, syngo eSieCalcs native tracking software for measurement accuracy, and Advanced fourSight technology for volumetric imaging . The Acuson S2000 uses pinless sensor connector technology and user ergonomics to facilitate a user-friendly system.

• Three universal sensor ports support 612 micro pinless connectors for legacy, Multi~D matrix array sensors, Hanfay lens technology and fourSight 4D sensor technology
• Electronic transducer selection
• One-handed transducer connection and disconnection
• Ergonomic ports for all sensors
• Aux CW port for 2 MHz and 5 MHz CW

FAQ

How long does an ultrasound machine last usually?

Generally, transducers can last up to seven years with proper maintenance, storage, and transport. This will vary based on manufacturer recommendations.

What information do customers need to offer in advance before repair?

1. The brand and model of the machine

2. Video or pictures of machine malfunction

3. Natural failure or artificial failure (for example, has it been repaired)

4. Accidental failure or frequent failure

5. All machines can do self-test, the same is true for HI VISION Avius and Preirus

6. Whether there is difference between connecting probe or not ( test selectively according to the machine fault, for example, if there is voltage error, the probe can be disconnected for test)