SS818 Non Staining Silicone Weatherproofing Sealant Class 50 ASTM C1248 For ACP Stone Facade

Silicone Weatherproofing Sealant, Non-staining/ ASTM C920 Class 50/ ASTM C1248 For ACP/Stone Facade

BAI YUN® SS818 non stain weather sealant for Stone ACP facade non bleeding weather sealant in Black white grey

BAI YUN^® SS818 Silicone

Stain-Resistant Silicone Weather-Proofing Sealant

High performance silicone sealant

Features

• Non-staining on natural stones and reduces residue rundown on metal and glass panels.
• Extension/compression movement capability of up to ±50% of the original joint width
• No unpleasant odor during curing,
• Non-corrosive curing system
• Excellent weather-ability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes
• Remains flexible over a temperature range of -58°F (-50°C) to 302°F (150°C)
• Excellent un-primed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles
• 10-year Limited Weather seal and Non-Staining Warranties are available

Composition

• One-part, neutral-curing
• RTV silicone sealant

Applications

• Joint weather sealing of glass curtain wall
• Weather sealing in metal, enamel curtain wall joints
• No-staining for porous materials, e.g. concrete, cement, stone, etc.
• Minimize residence rundown streaking

Typical properties

Specifications

·ASTM C920; Type S, Grade NS, Class 50, Use NT, A, G, O

·ASTM C1248;

Colors

Black, gray and white (general colors)

Other wide variety of colors (customized)

Package

300 mL cartridge and 590 mL sausage.

Storage and shelf life

12 months from the date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.

Product limitation

This product should not be used, applied or recommended:

• In structural glazing applications or where the sealant is intended as an adhesive.
• In areas where abrasion and physical abuse are encountered.
• In totally confined spaces as the sealant requires atmospheric moisture for cure.
• On frost-laden or damp surfaces
• To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes.
• In below-grade applications
• On substrates made of polypropylene, polyethylene, polycarbonate and poly tetrafluoroethylene.
• Where movement capability greater than ±50% is required.
• Where painting of the sealant is required, as the paint film may crack and peel
• For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)
• To surfaces in contact with food.
• For use underwater or in other applications where the product will be in continuous contact with water.

Handling and safety

Product safety information required for safe use is not included in this document. before handling, read product and material safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available from baiyun sales application engineer, or distributor, or by calling baiyun customer service.

How to use

Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.

Health and environment information

For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological and other safety-related data.