BAIYUN SMG533 Solar Panel Sealant Anti Low High Temperature Caulk

BAIYUN® SMG533 Solar module water sealing silicone sealant anti low high temperature silicone sealant for solar panel

BAIYUN® SMG533 Solar Module Silicone Sealant

1. Product Features

• This product has adopted advanced sealant product technology, use high purity imported base material, special technology can effectively eliminate residual unsaturation and low-boiling liquid. It has characters such as environmental friendly, low-odor and no corrosion etc;
• It has perfect adhesion performance with aluminum material, toughened glass, compound material and junction PPO material;
• Moderate hardness, lower water vapor transmittance;
• It has passed the double 85 high temperature and humidity test, anti-aging test, thermal tensile test. It has many abilities such as yellow-stain proof, moisture proof, condition corrosion resistance, mechanical shock resistance, thermal shock resistance and shock proof etc.
• It has passed SGS, UL, TUV, BSI certificate;
• It has passed QC080000 Hazardous Substance Process Management System Certification Certificate;

2．Main Purpose

• This product is used to seal the solar cell - aluminum frame, backsheet-PV junction, with excellent weatherability and durability.

3．Typical Technical Data

​4．Packing

• ​Plastic bottle packing, net volume is 310ml;
• Sausage Packing, net volume is 400ml;
• 5 gallons drum packing, net weight is 25kg;
• 55 gallons drum packing, net weight is 270kg.

5．Pretreatment procedure of adhesive surface

• All the surfaces must keep clean and dry, clean out the grease and contamination that have bad effect on adhesive surface. The solvent applicable include propel alcohol, or methyl ethyl ketone.
• Adhesion with some certain kind of plastics need to use special surface treatment. For example, adhesion with polypropylene and polytetrafluoroethylene need chemical corrosion or plasma-treatment, therefore it can reach optimal adhesion.

6．Instructions

• Apply SMG533 neutral sealant on the pretreated surface, cover the another cover instantly.
• When exposed to moisture at room temperature and 50% relative moisture, the surface of sealant would cure in crust in 10 to 15 minutes. Before curing the residual sealant should be swept out by knife tool ( use blade will sweep out the cure skin easily).

7．Curing Time

After formation of crust, curing process will penetrate into inside sequentially. In 24 hours time (at room temperature and 50% relative moisture), curing thickness of SMG533 neutral sealant is 4.1mm. The deep-seated part, especially the part that has limit contact with air has longer curing time. Similarly curing time would extend in low-temperature condition. We advise the users wait patiently (enough time) to avoid affecting the integrity of the sealant. This time is depended by many factors, it should decided by users (decide through special application of the sealant).

8．Service life and storage

When SMG533 neutral sealant is original biding , kept in shade and dry at the temperature below 27℃, useful life of neutral sealant is 9 months (since product time).

As the result of SMG533 neutral sealant would react with moisture of the air(form curing skin),the sealant must be tightly sealed in containers when not used. Blockage can form in sealant tube or tube end in storage time, it can be clean out easily ,residual component of the sealant won’t change.

9. Precautions

This product is innocuous after curing, but avoid contacting with eyes and children before curing; The work area must keep ventilation state.

Attention:The information published in this article is all that we believe to be reliable. Due to the wide variety of situations, we cannot understand all the situations, so we cannot guarantee the correctness and applicability of our products in certain usages and uses. Users should understand the product in detail before using the product, and then decide the best way to use it.

BAIYUN Company Introduction:

Guangzhou Baiyun Chemical Industry Co., Ltd. was established in 1985, with manufacturer area 40,000m2 and production capacity 120,000 tons/year.
BAI YUN is:
• The first silicone sealant 『esearch and production company in China.
• The first manufacturing ente『P『ise of silicone sealant in China.
• The first ente『prise to pa「ticipating in d『afting China’s fi『st national standard for silicone sealant.
• The first automatic continuous production line of silicone sealant, with independent intellectual
property rights and two Chinese excellence patent awards.
• The first super high performance silicone sealant in China. using in the global highest hidden frame
glass curtain wall Guangzhou IFC tower.
• The first 50-year Durability Test of silicone sealant in the world.