B-LY Rain Test Box Waterproofing Testing, Recovery time: Within 3 minutes
|
B-LY Rain Test Box Waterproofing Testing, Recovery time: Within 3 minutes
The rain test box is suitable for external lighting and signal devices and automobile lamp shell protection, can provide realistic simulation of electronic products and components during transportation and use may be subjected to a variety of environment such as water and spray test. In order to detect the waterproof performance of various products.
Rain test box is mainly used in electronic, electrical, aerospace, military and other scientific research units of external lighting, signal devices and car lamp shell protection test.
Waterproofing test class: There are waterproof testing requirements for portable, outdoor and automotive electronics. IEC, MIL, ETSI and SAE have formulated corresponding testing requirements internationally. IEC/EN60529 Waterproofing is divided into 9 classes (Class 0 to Class 8), waterproofing classes (e.g. IPX4- Waterproofing class 4) :
Level 0: completely waterproofing without protection Level 1: Vertical dripping should have no harmful effect Level 2: When each vertical plane of the case is tilted within the range of 15°, the vertical dripping shall have no harmful effect Level 3: Water is sprayed within 60° of each vertical plane, without harmful effects Level 4: Splashing the shell in all directions has no harmful effect Level 5: Spraying water in all directions to the enclosure has no harmful effect Level 6: Spraying water strongly in all directions to the enclosure has no harmful effect Level 7: The water intake into the shell will not reach the harmful degree after immersion in the water under the specified pressure for the specified time Level 8: The water intake of the casing will not reach harmful Level after continuous diving under conditions agreed by the manufacturer and the user (which shall be harsher than Level 7) Level 9: High voltage test Meeting Standards: IEC 60529 Model:
The main technical parameters: IP6 &UL1598, the external structure: a closed chamber Inside diameter (L×W× H): 1960 x 1960 x 1900mm Accessories:
Structure of EN/ UL Rain test chambers: 1,The outside layer is composed of the high quality stainless steel plate, the inner container is the composed of stainless steel tabula rasa. 2, Large area of visible glass door, easy to observe the test specimens in the testing chamber 3,The button is made of high quality of tank, can be fixed PU activities wheel, it is convenient for user moved. 4, With 270 degree swing pipe and 360 degrees whorl pole water jet device. 5, Adjustable speed samples stage.
Features of EN/ UL Rain test chambers:
Other sizes and capabilities available upon request. Please contact us with your application.
Packing/Shipping: |
![]() |
Corrosion Test Cabinet Customized Chamber Size 0.2Mpa-0.4Mpa Spray Pressure For Accurate Corrosion Measurement |
![]() |
220V Precision Humidity Temperature Sensor Damp Heat Test Chamber For Varied Testing Environments |
![]() |
Salt Spray Tester For Corrosion Testing / Salt Fog Test Chamber For Corrosion Resistance |
![]() |
Accurate BOTO Environmental Test Chambers For Reliability Testing |
![]() |
Environmental Test Chambers for 201 Stainless Steel Plate Burn In Aging Test Chamber |
![]() |
IPX4 IP Waterproof Water Resistance Test Chambers For Auto Parts Rain Spray Testing |