Cyclic Corrosion Testing
|
Detailed Product Description
|
Salt Spray Test Machine, Salt Spray Test Equipment, Salt Spray Test Chamber
Product description
This chamber is mainly used for Salt spray test (NSS,ACSS), Anti-corrosion test (CASS) and so on.
Product Parameters
Corresponding Standard : 1. GB/T 2423.17-1993 salt spray test 2. GB/T 2423.18-2000 salt spray test 3. GB/T 10125-1997 salt spray test 4. ASTM.B117-97 salt spray test 5. JIS H8502 salt spray test 6. IEC68-2-11 salt spray test 7. IEC68-2-52 1996 salt spray test 8. GB.10587-89 salt spray test 9. CNS.4158 salt spray test 10. CNS.4159 CASS Accelerated acetic acid copper salt spray test 11. GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray test Product Advantages 1. Spray method: A: continuous spray B: programmable spray. 2. Adopt a full detection system, which can be lighted when a fault
occurs. 3. The whole set is made of imported PVC board, the structure is
strong, never deformed, and it is resistant to acid and alkali and high temperature and never
aging. 4. Adopt automatic/manual water adding system, with the function of
automatic/manual water adding when the water level is insufficient, the test will not be
interrupted, and the water level will be alarmed when the water level is insufficient. 5. Quartz glass nozzle, the mist diffuses evenly, and falls naturally
on the test piece without blocking by crystalline salt. 6. The controllers are all on the same board, easy to operate and
clear at a glance. 7. With double over-temperature protection, warning of insufficient
water level to ensure safe use. 8. The imported temperature controller has manual and fully automatic
control methods, using digital display, PID control, error ± 0.1 ℃, the maximum setting
time can reach 999HrS. 9. The laboratory adopts direct steam heating method, the heating
speed is fast and uniform, and the standby time is shortened. 10. The spray tower is equipped with a conical diffuser, which has the
functions of guiding the mist, adjusting the amount of mist and evenly falling the mist. 11. The pressure barrel adopts Henry's law to heat and humidify. 12. The upper cover of the test tank is automatically opened and closed
by a pneumatic cylinder, which is easy to operate and has good safety. 13. After the test is completed, it has an automatic defogging device
to clearly observe the test products in the test room. Why Choose Us |
| Product Tags: 98% Humidity Salt Spray Test Chamber 270L Salt Spray Test Machine AC220V Salt Spray Test Machine |
Related Products
|
Corrosion Test Cabinet Customized Chamber Size 0.2Mpa-0.4Mpa Spray Pressure For Accurate Corrosion Measurement |
|
220V Precision Humidity Temperature Sensor Damp Heat Test Chamber For Varied Testing Environments |
|
Salt Spray Tester For Corrosion Testing / Salt Fog Test Chamber For Corrosion Resistance |
|
Accurate BOTO Environmental Test Chambers For Reliability Testing |
|
Environmental Test Chambers for 201 Stainless Steel Plate Burn In Aging Test Chamber |
|
1000L Environmental Programmable Humidity Chamber For Products Life Span Test |
Email to this supplier