20-Process Multi-Specification Automatic Cable Tray Forming Machine
Automatic cable tray forming machine is suitable for equipment for
producing cable trays
Production process of automatic cable tray forming machine:
Uncoiling-punching-small side bending-large side bending-fixed
length cutting
Technical parameters of The Size Of 20-Process Multi-Specification Automatic Cable Tray
Forming Machine
| No | Item | Parameter |
| 1 | Model | Punching and cutting before forming |
| 1 | Forming Speed | 10-20 m/min(depend on quantity of punching) |
| 2 | Forming station | 20 groups |
| 3 | Main Power | 15KW moving motor |
| Pump station Power | 5.5 KW |
| 4 | Total Weight | About 15,000 KGS |
| 5 | Voltage | 380v,60hz,3p |
| 6 | Diameter of shaft | 80 mm solid |
| 7 | Installation Size | About 30 *2 M *3 |
| 8 | Middle Plate | Double row 20mm middle plate |
| 9 | Main frame system | 400 mm channel steel structure with tempering heat treatment |
| 10 | Measuring accuracy | Precision 3m +/-3mm,with frequencyer |
| 11 | Transmission | By 1 inch double row chain. |
| 1 | Punching machine | 160T with servo feeding system |
| 2 | Molds | 1 set |
Advantages of automatic cable tray forming machine
1. The automatic cable tray forming machine adopts a double
cantilever gear transmission device to ensure sufficient power of
the equipment. At the same time, the automatic cable tray forming
machine adopts a through-shaft design, and the manufacturing width
can be adjusted continuously, and the width and height of the
profile can be changed.
2. There are 20 processes in the middle plate of the automatic
cable tray forming machine. The host is composed of AC motor,
reducer, housing, gearbox, level adjustment system and rolling die.
The base and transmission adopt a welded structure, with hardness
treatment, and the material of the roll is 45# steel.
3. The automatic cable tray forming machine uses the roll forming
process which is made by the German COPRA software; the forming
process is analyzed and inferred. Increase the line speed and
reduce the forming resistance. So as to ensure the accuracy and
stability of the equipment, the size of the cable tray profile
produced is accurate and easy to install. It can be directly sold
or installed.
