The building materials market is easy to install fully automatic
shelf column forming machine
Shelf column forming machine is a machine used to produce shelf
columns
The shelf column forming machine includes hydraulic uncoiling,
leveling, feeding, punching, forming, cutting, and discharging. The
control adopts Siemens PLC, touch screen input, high degree of
automation, convenient operation, high production efficiency, and
the production speed of the whole line can reach 40m/min.
The shelf column forming machine adopts automatic industrial
control technology, and compared with traditional distributed
multi-person processing, the production efficiency has been greatly
improved.
At the same time, the shelf column forming machine realizes
continuous production from raw materials to forming off-line. The
whole line only needs 1 person to operate and inspect, which helps
you reduce the number of operators and labor intensity, eliminates
the need for manual handling and positioning procedures, and
reduces Your labor costs
Main Parameters Of The building materials market is easy to install fully automatic
shelf column forming machine
| Coil Material | Type | Galvanized Steel Sheet |
| Thick | 0.3-1.0mm |
| Uncoiler (manual/automatic) | Weight Capacity | 6T |
| Inner Diameter | 460-520mm |
| Outside Diameter | 1400mm |
| Coil width | Max 600mm |
| Feeding and | Pinch rollers | one pair, up and down |
| straightening device | Straightening rollers | up three, down four |
| Diameter of rollers | 75mm |
| Roll Former | Frame type | single station |
| Forming Roller stand | about 14 Groups |
| Shaft material | High grade 45# steel, |
| Heated and quenched HRC55-60° |
| Shaft diameter | 50mm |
| Roller material | GCr15 |
| Drive Type | By gear |
| Forming Speed | 40-45m/Min |
| Motor | 5.5KW reducer with |
| requency control |
| Cutting | Type | After-cutting, hydraulic |
| Hydraulic cutter | Material of mould | Cr15 |
| With quenching treatment55-60° |
| Cutting tolerance | 10M+/- 2.0 mm |
| Feature | no distort, no wasting , high safe
factor.(main motor stop cutting) |
| PLC cabinet | PLC | XINJIE |
| Length Controller | Encoder |
| Operation | Touch Screen |
| Transducer | Delta |
| Hydraulic station | Hydraulic station power | 4 KW*2 |
| Hydraulic pressure | 15 Mpa |
| Runout Table | Non-power type | 2 pcs |
