Top Quality Steel Metal Roofing Glazed Corrugated Tile Roofing
Sheet Cold Roll Forming Making Machine
"Top Quality Steel Metal Roofing Glazed Corrugated Tile Roofing
Sheet Cold Roll Forming Making Machine" can be installed and fixed
in two ways: penetration and concealment.
Penetration fixing is the roof and wall "Top Quality Steel Metal
Roofing Glazed Corrugated Tile Roofing Sheet Cold Roll Forming
Making Machine" The common installation method is to use
self-tapping screws or rivets to fix the color plate on the
bracket. Penetration fixation is divided into crest fixation,
trough fixation or their combination.
The manufacturer of "Top Quality Steel Metal Roofing Glazed
Corrugated Tile Roofing Sheet Cold Roll Forming Making Machine" has
a very simple and cost-effective method, that is, before installing
the roof steel sheet, spread double-sided reflective foil film on
the strip or slat, this method is the same of. It can also be used
as a moisture barrier to reduce condensation.
In addition, in addition to the screws used to fix the concealed
buckle, other screws are also equipped with waterproof washers, and
are equipped with corresponding washers for lighting panels and
special wind pressure. Currently available screws can have plastic
heads, stainless steel top caps or coated with a special durable
protective layer.
In addition, in addition to the screws used to fix the concealed
buckle, other screws are also equipped with waterproof washers, and
are equipped with corresponding washers for lighting panels and
special wind pressure.
If the sagging depth of the membrane between the supports is
allowed to reach 50~75mm, the air layer between the membrane and
the roof panel will further improve the thermal insulation effect.
Concealed buckle concealed fixation is to first fix a special
concealed buckle matching the dark color board on the bracket. The
concave rib of the color plate has a hidden central rib. Usually
used for the installation of roof panels.
Main parameters of Top Quality Steel Metal Roofing Glazed Corrugated Tile Roofing
Sheet Cold Roll Forming Making Machine
| No | Item | Description |
| 1 | Coil | Width:1250mm |
| 2 | Forming speed | 8-15 m/min&1-4m/min (not including cutting time) |
| 3 | Roller Stations | 15&16stations |
| 4 | Material of Roller | 45# steel finish machining, plated hard |
| 5 | Material of Main Shaft | 45# steel finishing machining and then slack |
| 6 | Material of Shaft | 80 mm 45#steel forged |
| 7 | Driven Motor Power | 7.5KW |
| 8 | Hydraulic Station Power | 11 KW |
| 9 | Hydraulic Station Pressure | 12.0 Mpa |
| 10 | Electrical Control System | Taida PLC |
| 11 | Dimension (L*W*H) | 7300*1550*1200mm |
| 12 | Material of Cutter | GCr12 |
| 13 | Driving Mode | single chain 1 inch |
| 14 | Material Thickness | 0.3-0.8mm |
| 15 | Power Supply | 380V, 60HZ, 3 PHASES |
| 16 | Cutting accuracy | ±2 mm |
