Endresss+Hauser 5BH12-A03A1AB041A3 Flowmeter With Hygienic Design

Electromagnetic

Flowmeter with hygienic design, highest repeatability and an ultra-compact sensor.
For demanding dosing and filling applications.

High process safety – high measuring accuracy and repeatability in shortest filling time. Energy‐saving flow measurement – no pressure loss due to cross section constriction. Maintenance‐free – no moving parts.
Wetted materials CIP, SIP cleanable. Nominal diameter: DN 4 to 25 (¹⁄₈ to 1"). Measuring device conform to FDA.

Versatile and time-saving wiring – plug connector. Industry-optimized – ultra-compact design. For hygienic requirements – stainless steel housing.
Pulse/frequency/switch output, Modbus RS485. Custody transfer approvals (MID, NTEP). Excellent, easily cleanable transmitter.

DN 4 (⁵⁄₃₂"), 8 (⁵⁄₁₆"), 15 (½"), 25 (1")

Liner: PFA
Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022), Tantalum,
Platinum

Volume flow

±0.25 % o.r. ± 1 to 4 m/s (3.3 to 13 ft/s)
±0.5 % o.r. ± 1 mm/s (0.04 in/s)
±5 % o.r.

0.14 to 1.66 l/s (0.035 to 0.44 gal/s)

PN 16

Seal material EPDM: –20 to +130 °C (–4 to +266 °F)
Seal material Silicone: –20 to +130 °C (–4 to +266 °F)
Seal material Viton: 0 to +150 °C (+32 to +302 °F)

–40 to +60 °C (–40 to +140 °F)

1.4308 (304)

1.4308 (304)

IP66/67, type 4X enclosure

No local Operation
Configuration via operating tools possible

Pulse/frequency/switch output (passive)

None

Modbus RS485

DC 20 to 30 V

ATEX, IECEx, cCSAus

CE

Calibration performed on accredited calibration facilities (acc.to ISO/IEC 17025)
NTEP

3.1 material

Sanitary approval: 3-A, EHEDG, seals acc. to FDA