4.5mm 100m²/H Chain Link Fence Equipment For Railway

Fully Automatic Chain Link Fence Machine Doule Wire And Single Wire Can Customized

Working Principle

1. The wire is taken in from the pay-off stand and passed through the dies where the diamond size takes place.Different gap sized.
2. After passing from the die, the diamond pattern wire is automatically thrown on the winding
shaft in the stitching process.
3. Once the stitching is complete, the woven is manually glided down to enable the next switch to take place.
4. The chain link is automatically wound to form rolls when the desired length is setted.
5. One side or both side of the end of net hole is twisted or with burr in edge.
6. Use rolling side machine to make it into rolls.

chain link fence machine type

Main Parameter

Advantage

1. The machine is controlled by PLC automatic controller, so only one person is needed to  operate it.
2. One wire feeding which can reduce the breakdowns.
3. Wide width weaving scope: 1.8-4.5mm.
4. The high productivity for this machine can be 100m²/h.
5. The width scope can be 600-4000mm, and we can customize it for you.
6. The mesh size can be 25x25-120x120mm, and can be changed according to the mould.

Usage
The product is wildly used as prevent for road, railway, airport, residence district, seaport, garden, feeding and husbandry.