Multimode Fiber Pigtail SC/FC/LC/ST Single Multimode Single Dual
Core APC/UPC Customize | Prodcuct Parameters | | Interface model:SC,FC,LC,ST... | Mode:Multi-mode, Single mode | | Insertion loss:≤0.3dB | Number of cores:DX,SX | | Return loss:≥35dB(MM), ≥55dB(SM) | Ferrule type:Class A ceramic ferrule | | Reliability:≤0.2dB | Operating temperature:-40℃ 85℃ | | Repeatability:≤0.1dB | Fiber type:OS2,OM1,OM2,OM3,OM4 | | Tensile strength:45KG | Outer sheath material:PVC,LSZH,OFNP | | Tensile strength:≥200N | Test wavelength:850nm~1300nm(MM)
1310nm~1550nm(SM) | | Mating times:≥1000times | Cable outer length:0.9mm,2.0mm(default),3.0mm | | Minimum bending radius:38mm | Optical fiber specifications:9/125µm,50/125µm,62.5/125µm |
OEM/ODM Accepted
| List No. | Item | Model | Test requirements | SM | MM | | PC | UPC | APC | PC | UPC | | 1 | IL | LC/SC/FC/ST/MU/E2000 | (Connect with standard plug and standard adapter)
100%test | ≤0.3 | ≤0.3 | ≤0.35 | ≤0.3 | ≤0.3 | | 2 | RL | LC/SC/FC/ST/MU/E2000 | (Connect with standard plug and standard adapter)
10% sampling rate | ≥50dB | ≥50dB | ≥60dB | ≥25dB | | Field connector, Cold splice | (Connect with standard plug and standard adapter) | Field connector:Embedded:UPC≥40dB,APC≥50dB
Hot melt type:UPC≥50dB,APC≥60dB
Cold splice:≥40dB | | 3 | 3D pass rate | LC/SC/FC/ST/MU/E2000 | Physical inspection | ≥85% | | 4 | End face standard | LC/SC/FC/ST/MU/E2000 | Physical inspection | No defects in area A
Allow zone B ≤1μm scratches, ≤2μm spots, and the total number of
scratches plus spots is less than 5.
Allow C zone ≤2μm scratches, ≤2μm spots, unlimited number, ≤3μm
aprons | No defects in area A
Allow zone B ≤2μm scratches, ≤3μm spots, and the total number of
scratches plus spots is less than 5.
Allow C zone ≤3μm scratches, ≤3μm spots, unlimited number, ≤5μm
aprons | | 5 | Appearance requirements | Field connectors, cold spice, adapters, fiber optic connectors | Visual inspection (refer to swatches and sealing samples) | Product appearance and corresponding design, manufacturing
requirements are everywhere: the appearance should be smooth,
clean, free of oil, burrs, no scars and cracks, bright color, good
consistency, and the components must be tight and flat; the
appearance of the optical cable should be smooth and bright. No
impurity, no damage, clear printing, color conforms to product
requirements | | 6 | Material requirements | adapters | Physical inspection | The adaptor should use ceramic sleeves, the outer shell of the
adaptor and other plastic parts should be flame-retardant, and the
metal material should use HPb59-1 copper | | 7 | Tensile test {pigtail (cable) or connector with fiber below Φ1.0mm
is not applicable, adapter is not applicable} | MTP/MPO | Test conditions: A) Load: nN: B) Load time: 10 minutes: C) Load
rate: 50N/min<rate<250N/minute; D) Distance from the point of
load to the plug: L=22~28CM.
Requirements after the test: A) There should be no mechanical
damage such as deformation, falling off, and loosening. B) Optical
performance conforms to: Insertion loss change <0.1dB
(MU<0.1dB, MTP/MPO<0.3dB) Return loss change <5dB | ≥50 | | FC/SC/E2000 | ≥50 | | MU/LC | ≥70 | | | LC | ≥90 | | Leather cable | ≥50 | | Hot melt type | ≥40(Leather cable, 2.0 soft optical cable) | | ≥50(3.0 soft optical cable) | | Embedded type | ≥30(Leather cable, 2.0 soft optical cable) | | ≥50(3.0 soft optical cable) | | Cold splice | ≥4(0.125,0.25 optic fiber) | | ≥10N(0.9 optical cable) | | ≥30N(Leather cable) | | 8 | Tensile strength of adapter locking mechanism | SC | Test conditions: A) Load: nN: B) Load time: 10 minutes (MU load 1
minute); C) Load rate: 50N/minute; <speed<250N/minute; D)
Distance from the point of load to the plug: L =22~28cm.
Requirements after the test: A) There should be no mechanical
damage such as deformation, falling off, and loosening. B) Optical
performance conforms to: Insertion loss change <0.2dB, Return
loss change <5dB | ≥50 | | MPO | | LC | ≥80 | | MU |
|
