Diamond Pvc Mesh Netting Plc Double Wire Chain Link Fence Machine

Diamond Pvc Mesh Netting Chain Link Fence Machine Spare Parts

Introduction of Chain Link Fence Machine

Performance characteristics: This machine is double wire feeding ,the production speed is double than single wire feeding machine, the machine is PLC control so the tolerance is very small +/-1mm,low noise, and the machine can run stably for 24 hours.The machine is suitable for both galvanized wire and pvc coated wire. The following quotation sheet is the whole production line, you can produce chain link fence if you have wire.

Chain Link Fence Machine Advantages

can produce many different hole size of the mesh with different molds.The machine is controlled by PLC,we can set the length of the fence by PLC. The machine only need one worker for operating. Also one worker can operate two or three machines.

Cyclone Wire Mesh Making Machine Factory

1. It could work both of galvanized wire and pvc coated wire.

2. With alarm system for emergency matters occur.

3. Stop automatically when the machine reach the output set in advance.

4. With single/double wire feeding system.

5. It could adjust the mesh width automatically.

6. With high working efficiency and low noise.

Chain Link Fence Making Machine Detail

The appearance of the machine: 

Control system:The machine use PLC control system.The control panel include visual touch screen and buttons.Easy to opeation.

Edge Locking Device: This device can make twisted edge,knuckled edge.

Rolling Mesh Compressor

Finished Mesh