3300mm Width Rebar Reinforcing ODM Construction Mesh Welding Machine

Reinforcing Construction Mesh Welding Machine Description

The reinforcing construction mesh welding machine is full automatic weldig machine.The welding electrodes is powered by cylinders.So the welding effect is very firm.And the mesh pulling car is controlled by servo motor.It can run smoothly.the weft wire storage bin can store about 1 ton materials,so it is no need for frequent feeding,which reduces the labor intensity.

Reinforcing Construction Mesh Welding Machine Working Process

First the worker threads the warp wire into the clamp barrel of the automatic wire feeder device and put the weft wire into the weft wire storage bin.Then the worker open the machine,the automatic wire feeder will send the wire to the welding position.The weft wire will fall to the welding position automatically.Being welding,the mesh pulling car will pull the mesh panel out.The worker can thread the warp wire for the next panel while the machine is welding.So the output of the machine is improved.

Reinforcing Mesh Welding Machine Parameter

Usage of Reinforcing Mesh

1. For fencing mesh which used for highway ,railway and various function of protection.

2. For construction which used for basis of high building,roof mesh ,floor mesh.

3. It is also widely used in agriculture and poultry mesh,farming mesh and so on.

Wire Pay off: Each one can load about 1 ton wire

Welding Electrodes

Finished Reinforcing Mesh