Height 250mm Mesh Belt 150-600mm/Min Aluminium Radiator Brazing
Furnace
Product Theory:
1) The NB continuous aluminum brazing furnace machine adopts
high performance porcelain fiber cotton material for heat
preservation purpose.
The furnace is able to rise to 630℃ from the ambient temperature in
around 2 hours.
2) The muffle of the brazing oven is once-formed by the large size
bending machine and is 304 steel plate.
10M muffle is formed by one-time bending, and only there is one
v-slot at the bottom of the muffle. The one-time forming
muffle could reduce the misshapening effect at welding and also
deformation at the heating process.
3) the aluminum radiator brazing furnace (or called as CAB furnace)
has a complete control system integrating intelligent control,alarm
and protection system. The real-time temperature recording function
provide the process data of different products.
4) The zones of the furnace are divided based on upper, lower, rear
and back area. The heating power is adjusted through PID
regulator so that the furnace could achieve an ideal temperature
uniformity of ±1℃. The brazing area could achieve a
temperature uniformity of ±2℃ so that it could meet the
brazing requirements.
5) The temperature controller has the PID regulation function to
achieve a smooth temperature rise. Also the temperature
controller has the over-temperature alarm. The mesh belt is
steplessly regulated through the inverter. The driving mechanism is
started up in the acceleration manner, and stopped in the
deceleration manner to reduce the tension of the mesh belt.
6) The area of the fluxing chamber which contacts the flux is made
of stainless steel material. The two side walls of the fluxing
chamber are both set with an observation window to observe the
fluxing performance. The fluxing nozzles have a 90º fan-shape
spraying to prevent nozzle blockage. There is a filtering net for
recycling the flux to prevent damage to the fluxing pump.
Product introductions:
It is mainly used for brazing aluminum parts in
protective atmosphere. It is mainly composed of flux spraying
machine, electric drying furnace, brazing heating furnace, water
cooling and air cooling device, atmosphere control system and
automatic control system. It is suitable for mass production of
aluminum radiators such as parallel flow condenser, laminated
evaporator and automobile water tank.
Product technology:
Degreasing furnace
spray room,
drying furnace
brazing furnace
cooling system
Product specifications:
| Mesh belt operating surface height | 900mm |
| Normal operating temperature | 600～650℃ |
| Furnace temperature uniformity | ±3℃ |
| maximum service temperature | 700℃ |
| effective working size | 1000mm(Mesh belt width)×250mm(Height of mesh belt) |
| The channel size | 1050mm×300mm(Straight edge height) |
| Temperature control zone | 6 points in Section 6 of Section 3 (temperature measurement) |
| Temperature measuring point layout | The upper and lower of each section + furnace temperature
measurement |
| design power | 240KW±10% |
| Temperature control mode | PID,The work pressure regulating |
| heating mode | resistance wire |
| length of heating zone | 6M |
| conveying chain | SUS316L,Wire Φ 3 mm, wear silk Φ 3.5 mm |
About us:
Our company has been engaged in the manufacture
and development of automobile radiator condenser products for more
than 15 years. Most of the products are sold to all countries and
regions in the world, and have accumulated rich production
experience.Our company is good at manufacturing all the process of
the radiator tank production line.In recent years,many companies
from other countries in the same industry also bought the CKD from
us and purchased the machine equipment from us as well.
1: Our company In radiator tanks business line around 10 years
2: Currently more than 2,000 models of plastic tank and 1,500 items
of radiator for small car and truck, covering most famous car like
BMW, CHRYSLER, DAEWOO, FORD, GM, HONDA, HYUNDAI, MERCEDES-BENZ,
MITSUBISHI, NISSAN, TOYOTA, ect.
3: Obtaining hi-tech equipments and technics, including advanced
CNC, electric pulse, around 100sets new molds developed every year
If you are interested in setting up a radiator
factory in your place or buying any products , please contact us
and we will provide you with the best service and best price.
FAQ:
1.What’s the style of spray of the aluminum Brazing furnace
machine?
The spray of the aluminum Brazing furnace machine can be divided
into dry electrostatic powder spray style and aqueous solution
spray style.
2.Does the aluminum Brazing furnace machine is customized or
standard size?
The aluminum Brazing furnace machine is customized by customers
according to their respective capacity requirements and product
series specifications.
3.Does the aluminum Brazing furnace machine use gas?
The aluminum Brazing furnace machine can use natural gas as a
productive energy source.
4.How to know what kinds of specifications of the aluminium brazing
furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the
core and the dimensions of the production workshop.The engineer
will give the best cost-effective solution according to the
information provided.
