Fast Setting Addition Silicone Dental Impression Material Amazing Mold Putty
|
Fast Cure Addition Silicone Dental Impression Material Amazing Mold Putty
Product Description A dental impression is a negative imprint of hard (teeth) and soft tissues in the mouth from which a positive reproduction (cast or model) can be formed. It is made by placing an appropriate material in a stock or custom dental impression tray which is designed to roughly fit over the dental arches. Features 1. Putty Impression Material provides all the benefits of a true
putty, including higher consistency and insertion force than heavy
body materials.Plus, it is designed exclusively for use with Mixing
Unit – enabling reliable and reproducible dosage.
Technical data Item No.: MCSIL-SP6065 A/B Appearance: White A,Blue B Mix ratio: 1:1 Pot life: <1 minute Curing time(37C): <5 minutes Hardness: 65 Shore A Permanent deformation % <0.2% Dimensional stability % <0.25 Copy details(μm) <1.5 Tearing Strength: 2.0Mpa Elongation: 267%
How to Use Silicone Putty for Dental Use Step 1: Get the impression trays and stand in front of a mirror.
Precautions 1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves. 2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use. 3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer. 4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature. 5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure. |
Product Tags: 65 shore A Addition Silicone Silicone Dental Impression Material 65A 2.0Mpa Fast Setting Addition Silicone |
![]() |
0.1% Shrinkage 2.8 Mpa Tensile Strength 25A Working Time 3min Silicone Putty for Swan Cookie Mold |
![]() |
Effortless Detail Replication 65 Shore A Silicone Putty for Dental Molds White/Purple/Blue/Orange |
![]() |
Impression Silicone Putty For Equine Hoof Silicone Putty 65 Shore A |
![]() |
35 Shore A Easy To Mold Silicone Ear Putty Silicon ear Impression Putty |
![]() |
Two-Part Silicone Mold Putty For Dental Impression |
![]() |
65 Shore A Skin Safe Addition Dental Silicone Putty Silicone Impression Putty |