Biocare ECG-1210 Grounding Wire EKG Machine Electrical Safety Cable Protection Component

Biocare ECG-1210 Grounding Wire EKG Machine Electrical Safety Cable Protection Component

Grounding wire introduction:

This grounding wire assembly is suitable for the Biocare ECG-1210 electrocardiograph. It features yellow insulated wires crimped to a metal grounding terminal and reinforced with insulated heat-shrink tubing. As a core component of the device's electrical safety system, its wire length and terminal layout perfectly match the ECG-1210 machine internal structure, allowing for direct replacement and restoration of the device's grounding protection.

Troubleshooting :

Device Grounding and Power Connection:

To ensure safety and reduce AC and other electromagnetic interference, the device must be properly grounded. Before operation, always turn off the power, connect the three-prong plug to the device, and insert the other end into a grounded power outlet. Please note that water pipes or other conduits must never be used as a substitute for the grounding wire. Proper grounding not only ensures safe operation but also effectively reduces external interference.

Functions:

1. High Quality: This grounding wire uses a highly conductive copper core and tin-plated grounding terminals, featuring low contact resistance and stable performance. Its outer insulating sheath is wear-resistant and anti-aging, ensuring durability in clinical environments. Heat-shrink tubing seals the connection point between the port and the conductor, preventing breakage, oxidation, or leakage.

2. Safety: The primary function of the grounding wire is to ground the patient, safely shunting any leakage current or external interference voltage on the body, thereby reducing the risk of electric --shock.

3. Suppressing Power Frequency Interference: Everyday AC power (50/60Hz) can interfere with the human body. By providing a low-impedance release path for interfering currents, the grounding wire helps to clearly display key waveform details (such as P waves and QRS complexes), facilitating identification and analysis.

4. Establishing a Stable Reference Potential: This grounding wire provides a stable voltage reference for the ECG amplifier circuitry, ensuring that signals from all leads are accurately amplified and measured on a consistent baseline.

Notice:

1. Power Off First: Always turn off the power and disconnect the power cord before installation or replacement. Do not operate while the circuit is energized to prevent electric --shock or short circuits.

2. Connection Secureness Check: After installation, pull the wires firmly to confirm the terminals are secure and use a multimeter to test the grounding resistance (must be <4Ω) to ensure effective grounding.

3. Regular Maintenance and Inspection: Check the wire insulation for damage and the terminals for oxidation every 6-12 months. Replace any damaged parts immediately to avoid safety hazards.

4. Unauthorized Modification Prohibited: Do not arbitrarily shorten or extend the wires, and do not replace them with other wires. Doing so will disrupt the stability of the grounding loop and affect the safety protection effect.

Storage Environment Requirements: Spare components should be stored in a dry, well-ventilated environment. Avoid high temperatures, high humidity, or sharp objects that could scratch the insulation layer to prevent wire aging or damage.

FAQ:

1.Can your accessories be compatible with outdated imported medical equipment?

Yes. We maintain a long‑term inventory of spare parts for outdated imported equipment; simply provide the equipment model to obtain the corresponding compatible components.

2.Are the parts for old imported equipment more expensive?

Some rare and outdated parts may be slightly pricier; we will provide a reasonable quote based on the part's inventory availability and production complexity.

3.Can we provide third‑party certification for compatibility testing reports of accessories and equipment?

Yes. We can provide compatibility test reports issued by third‑party testing institutions to ensure their authority and validity.

4.Who bears the cost of the third‑party compatibility testing report?

For bulk orders, the third‑party testing fees are covered by us; for small‑batch orders, the testing fees shall be borne by you, and we will provide a reasonable quote.

5.Is the insertion and removal lifespan of the accessory components the same as those of the original components?

Yes, it is. The accessory components are manufactured strictly according to the original specifications, capable of withstanding ≥1,000 insertion and removal cycles, ensuring long‑term durability without damage.

90 Day Warranty                             SGS ceryification