PHiliph Microscope Bulb 6834FO EFP 12V100W GZ6.35 409737

Cup Lamp origingal new

►Quick Detail:

PHiliph microscope bulb 6834FO EFP 12V100W GZ6.35 409737 cup-shaped lamp positioning
This bulb can be used as an integrated reflector for focused illumination, Olympus BX or CH series microscopes
Or Nikon and Leica high-intensity lighting systems or medical/scientific equipment that requires 12V 100W focusing lights. When it is determined that the light source needs to be replaced, the most important thing is to turn off the power of the microscope, and at the same time, pay attention to the temperature of the light bulb reaching around 300 ° C during operation. Therefore, please cool the light bulb as soon as possible during replacement, which should take about 5 minutes. If uneven lighting is found after replacing the bulb, please adjust the position of the reflector. The light bulb has a pin, which needs to be aligned with the base of GZ6.35 and locked properly when replacing it.
If there are black spots on the new bulb after replacing it, please clean the surface of the reflective mirror with alcohol and wipe it clean. In addition, attention should be paid to the stability of the voltage to ensure that the power supply is stable and does not fluctuate, otherwise the light bulb is prone to burning out. If the new light bulb flashes after installation, please fix the bulb in the socket. Check for looseness.

Light bulb parameters:

Brand: Brand new original PHiliph
Model: 6834FO EFP 409737
Filament type: Halogen (tungsten, cup-shaped reflector)
Voltage: 12V
Power: 100W
Base type: GZ6.35 double needle
Lifespan: 50-100 hours
Packaging: One per box

After replacing the light bulb, optical calibration is required. Adjust the height of the spotlight and use a centering telescope to calibrate the position of the filament. Do not forcefully insert or remove the light bulb, which may cause deformation of the lamp holder. Please use tweezers or other auxiliary operations. Do not directly touch the glass part of the light bulb. If fingerprints are accidentally obtained, please clean them with isopropanol.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.