Metrax Primedic M240 DM1 Defibrillator Front Frame with keypad with screen

►Quick Detail:

This product is suitable for the Metrax Primedic M240 DM1 defibrillator. It consists of the front frame of the defibrillator and is equipped with a keyboard and screen. The product is a complete front frame.
The front frame is made of impact-resistant and waterproof ABS material frame, and is equipped with a keyboard suitable for this machine. Equipped with 8 keyboard buttons that can be pressed flexibly, the keys are sensitive and clear. The front frame of the defibrillator also contains some other buttons and functions, but not every model has them. For example, some defibrillators may have a selection of bidirectional and unidirectional waves, as well as an option to set the amount of output current. Before using a defibrillator, it is important to make sure you understand and know whether the specific model you are using is compatible with the product.
The screen is made of glass, which is resistant to impact and allows you to see the content displayed on the display very clearly.

The screen size conforms to the size of the monitor used by the Primedic M240 DM1 defibrillator. During maintenance, use a soft cotton ball to absorb an appropriate amount of detergent and then wipe the screen surface. If necessary, use a dry cloth to wipe off excess detergent. Never wipe with a wet cloth that is still dripping water. Otherwise, the screen display may be damaged and the normal use of the machine may be affected.

►Product maintenance

1. Functional check test
2. Check whether the insulation of wires and electrodes is intact
3. Clean the electrodes to avoid accidental leakage. After resuscitation treatment, the wires and electrode plates should be cleaned so that the instrument can be quickly put into use when needed.

► Working principle

The prompt words on the left side of the bottom of the front frame of the machine:
1. The propeller derivation is automatically activated after powering on.
2. Press button III to switch to external ECG electrodes. External ECG electrode cables must be connected.
3. Each button press switches to a different lead.
4. Press the button above the paddle. Switch to ECG display

The prompt words on the right side of the bottom of the front frame of the machine:
1. Paddle leads are active when powered.
2. Press the III button to select the extension. EKG leads. The external ECG cable must be connected.
3. Press each ECG lead. The button changes.
4. Press the button to select the paddle lead.

 features:

About delivery:

We default to express delivery by DHL. We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.