PHiliph Goldway UT6000A Patient Monitor parts Main Board Mother Board M-6A0S01B

PHiliphh Goldway UT6000A Patient Monitor Main Board Mother Board M-6A0S01B

► Brief Introduction

The monitors are full function monitors for use on adult, pediatric, and neonatal patients. The functions performed by the system include:

• Monitoring patient ECG, heart rate and respiration rate
• Non-invasive blood pressure
• Blood oxygen saturation
• Temperature

In addition to monitoring and displaying the status of physiological parameters, the monitor performs various microprocessor programmed analytical functions, including:

• Providing both visual and audible alarm signals as necessary.
• Providing warning messages when harmful conditions are detected that would degrade or prevent valid measurements.
• Providing trend waveforms or tabular data.
• Recording current waveforms or tabular data.

Goldway UT6000A Patient Monitors operate from either an AC power source or on battery power. The monitor charges the internal battery when powered by supply mains.

► Features

• Display and Interface: The system board may have a user-friendly interface with a display screen to provide real-time monitoring data. It could include touch controls or physical buttons for navigation.
• Parameter Monitoring: Patient monitor system boards typically monitor various physiological parameters, including but not limited to:
• Data Storage and Recording: Many patient monitors can record and store patient data for later review. This data can be useful for analysis and documentation.
• Alarms: Alarms are crucial for alerting healthcare providers to changes in a patient's condition. The system board may have customizable alarm settings for different parameters.
• Connectivity: Patient monitors often have ports or connectivity options for sending data to central monitoring systems or electronic health records (EHRs). This enables remote monitoring and data sharing.
• ECG Analysis: Advanced ECG analysis features like arrhythmia detection and interpretation may be included.
• User Profiles: The system board may support multiple user profiles or patient profiles, making it easier for healthcare providers to switch between patients' data.

► Main Board assembly

The Main Board assembly contains the following components:

• Microprocessor
• Flash memory
• Power management control

- Voltage regulator

- Battery charger that monitor status of battery

• LCD drivers
• Power distribution and monitoring
• Speaker driver
• Connectors

- DC input (wire to AC/DC module)

- LCD

- LCD backlight

- Alarm LED

- SpO2

- Temp (Temperature)

► Removing the Main board Assembly

1. Disassemble the main frame.

2. Remove the SpO2 module.

3. Disconnect the cables. (Rectangles)

4. Remove the screws. (Circles)

5. Remove the main board.

► Specification

Pls contact us, if you are interested in PHiliphh Goldway UT6000A Patient Monitor Main Board Mother Board M-6A0S01B.