PHiliph CX50 Ultrasound Battery Bothell WA 98021 PNF41003143 PN 453561446193

PHiliphh CX50 Ultrasound Battery Bothell WA 98021 PNF41003143 PN 453561446193

► Brief Introduction

The new CX50 system is built on a new platform and architecture in a small, compact design that is ideal for taking premium performance anywhere you need it. PureWave, a clinically proven imaging technology previously available only on PHiliphh premium systems, captures a broad band of tissue information for exceptional clarity and information. AutoSCAN optimization and Tissue Specific Imaging presets offer a new level of exam automation – transducers are optimized by exam type, providing excellent images with minimal adjustment. Highly configurable portability enables you to study the most difficult-to-image patients across a variety of clinical needs.

► Battery Operation

For portable operation, the system is powered by an internal lithium polymer battery. To protect the battery and prolong its life, follow these guidelines.

• Attempting to open the battery or incinerate it can result in serious injury. Do not strike, puncture, drop, or throw the battery.
• Do not immerse the battery in liquid or short the battery contacts with liquid or metal objects.
• Keep the battery clean and dry.
• Keep the battery out of the reach of children.
• If a battery leaks or emits a strong odor, remove it from the system and store it away from any ignition source. Avoid contact with the fluid. If you get fluid on your skin, wash the area with copious amounts of water and seek medical assistance.
• Do not charge or store the battery in direct sunlight or high temperatures. For safe operating and storage temperatures.

► Specification

► Battery Status

Indicates that the system is running on battery power and indicates battery status.

• Five blue bands: Battery is fully charged.
• Four to two bands: Battery is partially charged.
• Single red band: Battery is nearly depleted and should be charged.

► Installing the Battery

Use the following procedure to install or remove a system battery.

1. Turn off the system and wait for it to finish powering down.

2. Close the system lid and then turn the system over.

3. Press the latch on the battery cover and lift the cover up and away from the system.

4. Do one of the following:

•To remove the battery, lifting the connectorside of the battery first, pull the battery out of the compartment.

•To install the battery, lower the side of the battery opposite the connector into the compartment, and then push the connector side into the compartment.

5. Replace the cover, ensuring that it latches securely.

Thank you for your time! If you are interested in PHiliphh CX50 Ultrasound Battery Bothell WA 98021 PNF41003143 PN 453561446193, welcome to place your orders. Early order early shipment! If you want to explore more details please let us know.