Efficia DFM100 Defibrillator Machine Parts Patient Monitor Printer Recoder

Efficia DFM100 Defibrillator Machine Parts Patient Monitor Printer Recoder in good working condition

PHiliphh Efficia DFM100 Defibrillator Printer Recoder

► Brief Introduction

The PHiliphh Efficia DFM100 defibrillator printer recorder is a portable device that records the electrical activity of the heart during the administration of defibrillation therapy. It works in conjunction with the defibrillator unit to deliver high-quality printouts of the patient's cardiac rhythm and any interventions taken during resuscitation efforts.

This device is designed for use in hospitals, clinics, and emergency medical services settings where quick and accurate assessment of a patient's cardiac status is critical for the delivery of effective care. The Efficia DFM100 uses thermal printing technology to produce clear, easy-to-interpret waveforms that can help clinicians quickly identify any abnormalities in cardiac function.

The printer recorder is compact and lightweight, allowing it to be easily transported alongside other medical supplies in a backpack or medical kit. It can be powered by either AC or DC power, making it versatile and adaptable to different environments.

Overall, the PHiliphh Efficia DFM100 defibrillator printer recorder is an essential tool for healthcare providers who need to quickly and accurately document cardiac activity during defibrillation therapy. Its portability, ease of use, and accuracy make it a valuable addition to any emergency medical kit or hospital resuscitation cart.

► To clean the printhead:

1. Open the printer door.
2. Move the paper out of the way.
3. Clean the printhead surface (top, front of the compartment) with a cotton swap dipped in isopropyl alcohol.
4. Replace roll of paper and close door.

► Specification

Following are the main parameters of PHiliphh Efficia DFM100 Defibrillator Printer Recoder:

► Removal

1. Pull up on the printer door latch and open the printer door.
2. Remove the paper roll.
3. Loosen the two captive M 3x10 screws inside.
4. Remove the printer by pressing the printer lock inside and pulling it straight out of the printer well.
5. Unplug the printer cable. See Figure 54.
6. Remove the Printer out of printer compartment.

► Replacement

1. Install the Printer Cable.
2. Slide the Printer straight into the printer compartment and gently push until it clicks in place.
3. Open the Printer door and tighten the two pan head M 3x10 screws.
4. Replace the paper per illustration printed on the printer door, and close the door

Thank you for your time! If you are interested in PHiliphh Efficia DFM100 Defibrillator Printer Recoder , welcome to place your orders. 

Any inquiry will be highly appreciated and thanks for your support.