Original PHiliph M2741A CO2 Sensor Medical Equipment For Hospital

                              New and Original PHiliphh M2741A CO2 Sensor

                   New and Original PHiliphh M2741A CO2 sensor Medical Equipment For Hospital

Product Description

PHiliphh M2741A LoFlo Sidestream etCO2 bruger sensors
sofistikeret infrared absorption spectroscopy to measure
etCO2 and respiratory rates. lever sensors in clear,
Practical capnogram for respiratory rate up to 150 vejrtrækninger
I minute. Og med en tested at 50 ml/min he det det
Ideal for brug with spædbørn and fewer patients.
LoFlo sidestream etCO2 sensors Bruges together with PHiliphh
kapnografimåling serverudvidelse (M3014A) in
Combination with IntelliVue Multi-Måleserserveren.
PHiliphh tilbyder Luftvejsadaptersæt til intuberede patient
the increasing number of estimates of your etCO2 level. nose up
Kanyler oral-nasal that tilgængelege to ikke-intuberede patient
some known procedures.

Use Procedure

1. Connect the m2741a CO2 sensor to the patient monitor. Connect the sample line and the lime.
Hose to the sensor. Make sure the sensor is disconnected from the patient circuit.
2. Turn on the patient monitor.
3. Go to monitor service mode.
Performance testing
3 testing and maintenance 89
4. Use sensor status given in m2741a serial protocol, wait for m2741a
The sensor heats up to operating temperature.
5. Reboot the sensor. Make sure that there is no gas in the air of the room
6. Connect a flow-controlled gas mixture of 5% CO2, n2 balance, to the calibration tube.
7. Turn off gas correction.
8. Wait a few seconds for the gas mixture to stabilize and monitor the CO2 level.

Product Features 

1. Application environment: ideal for general service, intensive care,CCU, ER, OU and EMS
2.Compatibility: The M2741A sensor is compatible with any IntelliVue Patient Monitor Series (Version D.0 or later)
3. Reliability: Provides clear and accurate etCO2 measurement
4. Reliability: solid solid state design
5. Innovative: sample cup and filter attached to
disposable sampling kits that prevent contamination of liquids sensor
6.Easy: plug-and-play function; intuitive and easy to use,does not require regular calibration

Product Details

                  If you are interested in New and Original PHiliphh M2741A CO2 Sensor,please feel free to contact us.

        If you have any questions about the New and Original PHiliphh M2741A CO2 Sensor, please feel free to contact us.