Heartstart Radiolucent Multifunction Electrode Defibrillation Pads Electrodes For Adult Child M3716A 989803107811

PHiliphhilip Heartstart Adult/Child Radiolucent Multifunction Electrode Defibrillation Pads/Electrodes M3716A 989803107811

► Brief Introduction

It’s can work for PHiliphhilip Heartstart XL+, Heartstart MRx, Heartstart XL, Heartstart FR2, Heartstart FR3.

AED Energy Profile: Fixed Energy (150 Joules).

AED Shock Series: 1, 2, 3, or 4 shocks per series.

Shock Series Timer: off, 30, 60, 90, 120, 150, 180, or 210 seconds.

Text and Voice Prompts: Extensive text and audible messages guide user through protocol.

► Using Multifunction Electrode Pads

To prepare for defibrillation using multifunction electrode pads:

1. If not pre-connected, connect the pads cable to the defibrillation by aligning the white pointer on the pads cable connector with the white arrow on the green Therapy port. Then push until you hear it click into place.
2. Check the expiration date that appears on the pads package.
3. Inspect the packaging for any damage.
4. Connect the pads connector to the pads cable.
   • ​​​
5. Apply the pads to the patient as directed on the pads packaging or according to your organization’s protocol.

► Preparing for Pacing of HeartStart MRx

1. If not pre-connected, connect the pads cable to the HeartStart MRx by aligning the white pointer on the pads cable with the white arrow on the green Therapy port. Then push until you hear it click into place.
2. Make sure the multifunction electrode pads packaging is intact and within the expiration date shown.
3. Connect the pads connector to the pads cable.
4. Apply the pads to the patient as directed on the pads packaging or according to your organization’s protocol. Prepare the patient’s skin prior to applying the pads. Skin is a poor conductor of electricity, so skin preparation is important in achieving good contact.
   • If necessary, clip hair at the electrode sites (or shave sites if needed).
   • Clean and abrade the skin at the electrode site.
   • Dry the electrode sites briskly to increase capillary blood flow in the tissues and to remove oil and skin cells.
5. If pacing in Demand Mode, apply monitoring electrodes and connect the ECG cable to the HeartStart MRx.

► About Company:

I have supply the Parts, Accessories and medical equipment of Patient Monitor, Defibrillator Machine, ECG Machine,Ventilator, Anesthesia Machine, Ultrasound such as
GE,
PHiliphhilip,
Mindray,
Goldway,
Nihon Kohden,
Med-tronic,
Masima,
Drager,
Edan,
Zoll,
etc.

Please kindly contact us, if you are interested in PHiliphhilip Heartstart Adult/Child Radiolucent Multifunction Electrode Defibrillation Pads/Electrodes M3716A 989803107811, Thank you!