Mindray IMEC7 Patient Monitor With ECG RESP NIBP SpO2 PR TEMP Parameters

Mindray IMEC7 Patient Monitor With ECG, RESP, NIBP, SpO2, PR, TEMP Parameters

Mindray iMEC 7 patient monitor product introduction:

Standard configuration parameters: ECG, RESP, NIBP, SpO2, PR, TEMP

Powerful software function

　　IMEC 7 has a flexible display interface, powerful data storage function, convenient data export function, and quick clinical configuration settings

Large font display interfaceDynamic short trend Respiration oxygenation diagram

• The eye-catching large font display allows medical staff to grasp important PHiliphhilipysiological information of the patient without having to be at the bedside, making it more convenient during night rounds and transfers

• The short trend chart is displayed on the same screen to fully grasp the changing trend of all parameters within 8 hours, so that the medical staff can fully grasp the change of the condition

• Respiration and oxygenation status are clear at a glance, especially suitable for observing changes in neonatal conditions

A new touch experience

800X600 high-resolution TFT display, touch operation mode is more in line with the operating habits of medical staff, the operation is simpler and faster, saving time and effort

Thin and compact, streamlined design

• Mindray Technology's innovative design, lighter and thinner shape, streamlined appearance, and right-handed operation mode, fully conforms to the use habits of clinical medical staff, and the operation is more smooth

• The eye-catching button backlight makes the alarm situation clear at a glance

Large capacity lithium battery

Large-capacity lithium battery ensures long-term battery life without power supply, eliminating traditional lead-acid batteries, and making the memory effect never return

Reliable and economical clinical assistant

12 inch touch TFT display

　　 8-channel waveform display

New Mindray ECG and blood oxygen algorithm

• Masima, Nellcorrr's blood oxygen technology
• Big font, dynamic short trend, respiratory oxygenation graPHiliphhilip display interface

• Drug concentration, hemodynamics, respiration, oxygenation, renal function calculation

• Other bed observation function, support wired and wireless networking

• Large-capacity data storage

Front View

1. Alarm light When a PHiliphhilipysiological alarm or technical alarm occurs, this light will flash as defined below.

u

High level alarm: the indicator light flashes red quickly. u

Intermediate alarm: The indicator light flashes yellow slowly. u

Low liquid level alarm: the light is yellow and does not flash.

2. Display

3. Power switch u

Press this switch to turn on the patient monitor. u

When the monitor is on, press and hold this switch to turn off the monitor. An indicator is built into this switch. It turns on when the patient monitor is turned on, and turns off when the patient monitor is turned off

4. AC power indicator

Lights up when AC power is connected.

5. Battery indicator

On: When the battery is installed and AC power is connected.

Off: When the battery is not installed or the installed battery is faulty, or the patient monitor is not connected to AC power when the patient monitor is turned off. Blinking: When the patient monitor is on battery power.

6. Press to reset the alarm.

7. Press to pause or resume the alarm.

8. Press to freeze or unfreeze the waveform.

9. Knob Rotate the knob clockwise or counterclockwise. Each time you click, the highlight jumps to the adjacent item. When you reach the desired item, press the knob to select it.

10. If there is no menu displayed on the screen, press it to enter the main menu. If a menu is displayed on the screen, pressing it will close the menu.

11. Press to start or stop recording.

12. Press to start or stop NIBP measurement.

Side View

• Recorder
• Battery compartment
• Connector for C.O. cable
• CO2 gas outlet
• Slot for CO2 watertrap (sidestream)
• Connector for ECG cable
• Connector for SpO2 cable
• Connector for NIBP cuff
• Connector for Temp probe 1
• Connector for Temp probe 2

11 Connector for IBP cable

Rear View

• Equipotential Grounding Terminal

If the patient monitor and other devices are used together, their equipotential ground terminals must be interconnected to eliminate the potential difference between them.

• AC Power Input
• Multifunctional Connector

It emits a defibrillator synchronization signal, a nurse call signal, and an inference output signal. For iMEC15S / iMEC15 you can also connect the AG module.

4.VGA Connector

It connects to an additional monitor which expands the display possibilities of the monitor. What is displayed on the second screen is similar to what is displayed on a monitor screen.

5.USB Connector

It connects the USB devices, such as a barcode scanner.

• Network Connector