High Frequency Induction Heating Equipment 70KW 30-80KHZ Forging / Fitting

70KW 30-80KHZ Forging / Fitting High Frequency Induction Heating Equipment device

1. Adopt the latest MOS, IGBT frequency control technology, energy efficient, high output power
2. With constant current and constant power control function, it can greatly optimise the heating process of metal, achieve high efficiency and fast heating, and give full play to the superior performance of the product.
3. It has the function of setting three time for heating, holding and cooling, and the heating and holding power can be adjusted individually, so that the required heating and holding process can be obtained, and it is suitable for batch and repetitive heating places.
4. As many as ten kinds of fault state protection and display including over-current, over-voltage, underwater, lack of phase, etc., providing higher reliability and durability. Safe and reliable, the equipment does not have 10,000 volts of high voltage, safe operation.
5. 100 per cent full load design, can work continuously for 24 hours without interruption. Can be equipped with infrared temperature measurement, to achieve automatic temperature control, improve the quality of heating, simplify the workers to explore work.

Advantages of Induction Heating Equipment
1. Fast heating: the minimum rate of heating is less than 1 second (rate of heating is available for adjustment and control).
2. Wide coverage of heating: it can be used to heat various metal parts (replace removable induction coil as per different operating switches).
3. Easy installation: it can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.
4. Easy operation: you can learn to operate it within several minutes.
5. Fast start-up: it can be started to perform heating operation on condition that water and power supply is available.
6. Low power consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work piece is, the lower power consumption would be.
7. High effectiveness: it has such features as uniform heating (it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece), fast warming and limited oxic horizon, and can guard against any waste after annealing.
8. Comprehensive protection: it has such functions as overpressure, over-current, overheat and water shortage alarm indications as well as automatic control and protection.
9. Controllable temperature: it is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.
10. Comprehensive full load design: it can work continuously for 24 hours.
11. Small size and light weight: it has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space.
12. Elimination of high voltage: it requires no step-up transformer which may produce approximately ten thousand voltage, and thus can ensure the maximum safety.

RFQ