1000mm High and Low Temperature Tensile Testing Machine For Wire 200KN

1000mm High and Low Temperature Tensile Test Machine For Wire 200KN

Product introduction:

Completion-aided test devices of the high and low temperature tensile test machine: special high and low temperature box (temperature humidity chamber), temperature-protected sensor, high low temperature fixtures, sliding auxiliar.Two cooling options for highlow temperature box: electronic cooling and liquid- nitrogen refrigerating.Application in 200KN-below mechanical material tests under high and low temperature: stretching, peeling, tearing, compression, bending, shearing, piercing, low cycle fatigue. Mainly used in metal, plastic, rubber, textiles, synthetic chemicals, wire and cable, leather etc.

Temperature range:

1. Temperature range:-70~+150℃ when equipped with high and low temperature chamber;

2. Temperature range: normal temperature ~1000℃ when equipped with high-temperature furnace.

Parameters:

1. Load:1, 5, 10, 20, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000Kg

2. Force resolution:1/100000~1/1000000

3. Force accuracy:≤0.5%

4. Power magnifying multiples:seven segment

5. Displacement resolution:1/1000

6. Displacement accuracy:≤0.3%

Power units : Kg, N, KN, g, lb; displacement unit: mm, cm, inch

7. Metal extensometer resolution: 1/1000

8. Metal extensometer accuracy: ≤0.5%

9. Large deformation extensometer: ±1mm

10. Speed range: 0.001mm / min ~ 1000mm / min (special speed testing customized)

11. Walking space: 1000mm (Holder excluded,special test space customized )

12. Test Width: 400mm (special test width customized)

13. Power supply:220V 50HZ (110V as required)

14. Machine Size: about 500 × 500 × 1800 mm (L × W × H)

15. Machine weight: 250~800KG

Standards:

GB, ISO, JIS, ASTM, DIN

1000mm High and Low Temperature Tensile Test Machine For Wire 200KN