Digital Readout 2 Axis DRO SDS2MS Readout Display With Precise Positioning Function

2-Axis DRO SDS2MS Digital Readout Display With Precise Positioning Function

Introduction to SDS2MS:

The following features are present in the SDS 2MS digital DRO and the 2-axis KA300 linear error correction and nonlinear error correction magnetic scale system:

Dual axis DRO: With this kit's support for dual axis measurement, you can concurrently watch and manage the machine's movement along two axes, such the X and Y axes in a milling machine, which lets you keep a close eye on the equipment's condition.

Magnetic ruler encoder system: To deliver precise and reproducible measurements, the KA linear ruler encoder system makes use of magnetic technology. Together with the DRO display unit, the magnetic balance is mounted on the machine shaft and utilized to offer position feedback and monitor job progress at all times.

Wide voltage range: The SDS 2MS DRO kit is designed to support a wide voltage range for optimal operation between 100V and 240V AC. This voltage flexibility ensures compatibility with various power supply standards.

User friendly interface: The DRO display unit has a user-friendly interface, usually with a digital display screen and buttons, making it easy to operate. It allows you to switch between different measurements of u, saving work time.

Capabilities possessed:

1. Radius/diameter conversion.

2. MM/Inch conversion.

3. Absolute/relative conversion.

4. Mid-splitting function.

5. Easy "R" function.

6. Smooth "R" function.

7. PCD hole positioning on circumference.

8. 200 groups zero position memory.

Detailed parameters of DRO SDS2MS digital readout system:

1. Voltage range: AC 85 v ~ 250 v / 50 hz ~ 60 hz

2. 15w power consumption: 25 va

3. Coordinate the number: a coordinates, two coordinates

4. Show that signed seven display (two or three axis) output data information using eight meters words show symbols

5. Net Weight: 1.3kg/2.9lb

6. The input signal: TTL, EIA - 422 open collector output signal, convenient interface with a programmable controller.

7. Allow the input signal frequency: > 100 KHZ

8. To connect a resolution: 10 microns, 5 microns, 2 microns, 1 mu m, 0.5 microns

Product image /photos:

​

The rack in the picture is optioned, not standard product.